Other testing equipment, buy CDEF Automatic 10KV TAN Capacitance and Dissipation Factor Tester on China Suppliers Mobile

Product Details

Automatic anti-interference dielectric loss tester
(Capacitance and Dissipation Factor Test Set & Tan Delta Tester) CDEF

Dielectric loss measurement is a basic method in insulation test and effectively detect damp, degradation and partial defect of insulation of electrical equipment. This method is
widely used in electric manufacturing, electric equipment installation, connection and preventive test. Measurement on dielectric loss of transformer, mutual inductor, reactor, capacitor, bushing and arrester is the most basic method to test their insulation property. CDEF fully-automatic anti-interference dielectric loss tester breaks through the traditional bridge testing method and adopts variable frequency power technology, single chip and modernized electrical technology to carry out automatic frequency shift, analog-to-digital conversion and data computing. It features strong anti-interference capacity, high test speed, high precision, automatic digitization and easy operation. It adopts high-power switching power supply, which outputs 45Hz and 55Hz pure sine wave and automatically increase the voltage to a maximum value 10 KV. It can filter 50Hz interference automatically, and it is applicable to the site test of substation and other places with large electromagnetic interference. This methods is extensively applied in dielectric loss measurement of transformer, mutual inductor, reactor, bushing, capacitor, arrester and others equipments in power industry.

1. Please read this manual carefully before using the instrument.
2. Operatorof this instrument should be equipped with the knowledge of using general electrical equipment and instrument.
3. Thisinstrument is suitable for both indoor and outdoor use and should be kept away from rainwater, corrosive gas, thick dust, direct sunshine and so on.
4. The instrument should avoid severe vibration.
5. Maintenance, care and regulation of the instrument should be conducted by professionals.
6. Connectthe grounding terminal of the instrument with the ground by a ground wire in a reliable way before any wiring.
7. Asthe testing equipment may produce HV, the testing personnel should abide by the safety operation specification strictly to
prevent others from contacting high-voltage component and circuit. Personnel who are directly engaged in testing must exactly
understand the high-voltage test circuit as well as key points for operation. People other than testing personnel must keep
away from HV testing area and the testing area should be clearly marked with fence, rope or warning sign.
8. Adjustment and maintenanceof the instrument should be conducted in a no power-up state. Jf power-up is required, the operator
must be familiar with the high-voltage hazardous components of this instrument very well.
9. In case that the fuse is broken, replace it with another identical fuse. Any fuses of different models or direct use in short circuit is forbidden.
10. In case that the instrument breaks down, turn the power off and check it one minute later.

Capacitance range	Internal HV: 3pF～60000pF/10kV 60pF～1μF/0.5kV External HV: 3pF～1.5μF/10kV 60pF～30μF/0.5kV
2. accuracy:	Cx: ±（reading×1%+1pF） tgδ: ±（reading×1%+0.00040）

1.1.Fully Automatic Karl Fischer Water Content Tester TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800

8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000

MOQ	1 Set
Trade Terms	EXW, FOB, CIF, CFR
Payment Terms	T/T, L/C
Port of Loading	Any Port of China
Packing Method	Internaional Standard Wooden Case
Transportation Method	By Sea, By Land, By Air, By Express
Supply Capability	100 Sets/Month

* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.

Chongqing TOP Oil Purifier Co., Ltd

Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.

Welcome to visit our website, welcome your inquiry.

Abby (Miss) | Sales Manager
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: abby@topoilpurifier.com
Cell: 0086-13983391036 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
;