Precise on-site Quantification of Siloxanes in Biogas, Landfill and Digester Gas GC-IMS-SILOX
The GC-IMS-SILOX is a stand-alone device that has been developed for user-friendly and reliable one-site measurements of siloxanes in biogas, landfill or sewage gas. The device has a straight- forward single-click menu and can alternatively be run as online monitoring system testing the gas automatically in user defined intervals. Results of siloxanes, silica (SiO2) same as silicon
(‘Total Si’) are stored on its flash memory and shown on the 6.4"
touchscreen or the ‘Total Si’ value is transfered via 4 – 20 mA or MODBUS (TCP).
To run the system it only takes power and nitrogen
(cylinder or N2-generator). Flexible sampling is as- sured by an integrated pump and a six-port valve to either test from gas
sample-bags or as preferred directly from the gas pipe via a by-pass. Condensa-tion water can be trapped by the use of an optional (GENIE-) filter.
Technical Specification： | ||
Separation I | Retention time | |
Gas chromatograph (GC) | Isotherm (< 80 °C) | |
Capillary Column | 30 m | |
Separation II | Drift time Ion Mobility Spectrometer (TOF-IMS) | |
Ionisation | ß-radiation - 3H | |
Activity | 300 MBq, below the exemption limit of 1 GBq acc. to EURATOM guideline | |
Detection | Electrometer Ion Mobility Spectrometer | |
LoD for siloxanes | one digit ppb | |
Typical range for siloxanes | 0.03 – 5.0 mg/m3 | |
Pneumatics | 2 Electronic Pressure Controler (EPC) for flow stability and GC ramping | |
Sampling | Ambient pressure Firmware controled pump plus heated electrical 6-port-valve Liquid trap (condensation water) optional | |
Requirement purge gas: | Nitrogen: Quality 5.0 (cylinder or generator) | |
Operation | Manual: Touch-screen 6.4 " TFT Remote test on-line: User defined intervals | |
Data Storage (internal): | Flash memory 16 GB | |
Data output: | USB, 4 – 20mA, MODBUS (TCP) | |
Temperature | Operation 0 – 40 °C | |
Moisture | up to 95 % non condensating | |
Power range | 100 – 240 V AC, 50 – 60 Hz | |
Power consumption: | < 200 Watt | |
Dimensions: | 449x 435 x 177 mm (W x D x H) | |
Weight: | 15.5 kg | |
Housing: | 19", IP 20 enclosure, CE Marking | |
1. Water Content Tester TP-2100
2. Digital Karl Fischer Water Content Tester TP-6A
3. Kinematic Viscosity Tester VST-2000
4. Kinematic Viscosity Tester TPV-8
5. Kinematic Viscosity Tester VST-3000
6. Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7. Automatic Surface/Interface Tension Tester IT-800
8. Automatic Open Cup Flash Point Tester TPO-3000
9.Closed Cup Flash Point Tester TPC-3000
10.Digital Open Cup Flash Point Tester TPO-100
11.Digital Closed Cup Flash Point Tester TPC-100
12.Cloud Point & Pour Point Tester PT-2000
13.Multi-functional Vibration Tester VBT-2000
14.Automatic Potentiometric Titrator TP668
15.Petroleum Products Density Tester DST-3000
16.Karl Fischer Volumetric Water Content Titrator TPD
17.Distillation Range Tester DIL-201
18.Online Oil Quality Tester PTT-002
19.Copper Corrosion Tester TP-113
20.Dew Point Tester DPME-P
MOQ | 1 Set |
Trade Terms | EXW, FOB, CIF, CFR |
Payment Terms | T/T, L/C |
Port of Loading | Any Port of China |
Packing Method | Internaional Standard Wooden Case |
Transportation Method | By Sea, By Land, By Air, By Express |
Supply Capability | 100 Sets/Month |
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Chongqing TOP Oil Purifier Co., Ltd
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.