Integrated Thermal Analyzer TGA-DSC8000
melting point, heat of fusion, heat of crystallization and crystallization, heat of phase change reaction, thermal stability (oxidation induction period), glass transition temperature, adsorption and desorption, The content analysis, decomposition, compounding, dehydration, and additives of the components were studied. A flexible design with a wide range of options is the ideal tool in your lab. Instruments are widely used in most materials, including plastics, rubber, synthetic resins, fibers, coatings, grease ceramics, cement, glass, refractories, fuels, pharmaceuticals, food, refractory materials.
2. Automatically lift the furnace body.
3.USB communication interface, strong versatility, reliable communication without interruption, support self-recovery connection function.
4. Water bath insulation system, which cuts off the influence of the temperature of the high temperature furnace body on the weight of the balance.
5. Automatically switch two channels of atmospheric flow, the switching speed is fast, and the stabilization time is short. At the same time, add a protective gas input.
6. Configure the furnace body sealing system to achieve a full atmosphere protection
environment and avoid air impact.
7. Improved installation process, all mechanical fixing, sample support rods are flexible and replaceable, and crucible can
be selected with various models to meet different needs.
8. The flow meter automatically switches the two-way gas flow, the switching speed is fast, and the stabilization time is short.
9. Lower dish balance weighing system, electromagnetic force balance principle.
Temperature range | indoor temperature ~1200 °C |
Temperature resolution | 0.01 ° C |
Temperature fluctuation | ±0.1 °C |
Heating rate | 0.1 ~ 80 ° C / min |
Constant temperature | indoor temperature -1000 ° C |
Constant temperature time | 0-500min (the temperature above 1300 ° C is recommended not to exceed 60min) |
Temperature control mode | PID temperature adjustment |
DSC resolution | 0.01mW |
DSC range | 0～ ±600mW |
DSC sensitivity | 0.1mW |
Balance measurement range | 0.01mg-2g (optional range 10g, 50g, etc.) |
Thermogravimetric resolution | 0.01mg (optional resolution 1ug, 0.1ug, etc.) |
Gas control | two-way gas control of nitrogen and oxygen (automatic switching of instruments), sealing the furnace body, fully realizing nitrogen protection, providing a leak test sample |
Working power | AC220V/50Hz or customized |
Gas flow rate | 0-200mL/min |
Gas pressure | 0.2MPa |
Optional crucible | aluminum crucible 6.76.7*3mm, ceramic crucible 6.76.7*3mm |
Parameter standard | equipped with standard materials (indium, tin, zinc, silver), users can correct temperature enthusiasm |
1.1.Fully Automatic Karl Fischer Water Content Tester
TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
MOQ | 1 Set |
Trade Terms | EXW, FOB, CIF, CFR |
Payment Terms | T/T, L/C |
Port of Loading | Any Port of China |
Packing Method | Internaional Standard Wooden Case |
Transportation Method | By Sea, By Land, By Air, By Express |
Supply Capability | 100 Sets/Month |
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Chongqing TOP Oil Purifier Co., Ltd
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.
Welcome to visit our website, welcome your inquiry.
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales10@topoilpurifier.com
Cell: 0086-13983286435 (Whatsapp/Wechat) | Skype: sales10@topoilpurifier.com
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
www.topoilpurifier.com; www.toptester.com.cn