Concrete Creep Testing Machine
Instruction Manual
1. Usage Scope
Concrete Creep Testing Machine is designed to determine of concrete cylinder and cuboid parts under constant pressure load over time, ie, the creep deformation of concrete. It is applicable for concrete creep deformation test under single-direction pressure at constant temperature in a humid-free environment; The design and manufacture of this equipment in accordance with water sector standard SL352-2006 and national industry standard and it is able to meet the requirement the requirement of concrete creep deformation test performed by design, construction and quality inspection departments of scientific research institutions of relevant industries, universities and colleges;
2. Technical parameters
1. Maximum Testing Force |
500KN |
2. Measurement Range |
0-500KN |
3. Relative reading error |
±1% |
4. Spring Height |
300mm |
5. Spring Compression Stroke |
52mm |
6. Maximum Distance Between Upper Platen and Lower Platen (Compression space) |
1500mm |
7. Power Supply |
220V, 50Hz |
8. Product overall Dimension (without packing) |
580*580*1800mm |
9. Net Weight |
About 800KG |
3. Product features
(1) After the pressure of this test machine is increased to rated level and the adjustable nuts are fixed, the digital instrument will indicate current pressure. In case the long time compression deformation pressure is low (less than rated pressure), the hydraulic system shall be manually operated to increase the pressure to rated level and to fasten the adjusting nuts;
4. System configuration
Creeping Testing Machine consists of main unit, hydraulic system, force measurement unit and compression deformation system, etc;
(1) Main unit consists of the upper platen, screw rod, middle compression platen, lower compression platen, adjustable nut, compression platen leveling plate assembly, folded spring etc. A Movable ball base is mounted between upper and lower platens; during operation, when the bottom surface of the upper compression platen touch (in contact with) the top surface of specimen, it can automatically adapt to the slight tilt in height direction of test piece (specimen), enabling the two platens contact in large area for uniform stress ; The upper compression platen will fall or rise automatically by rotating the adjusting nut according to the size of test piece so as to adapt to the test space. The top surface of upper and lower compression platen is carved with positioning frame for the convenience of placement of test piece at the center
(2) The hydraulic system
The hydraulic system consists of a hydraulic pump, oil pipe and separate (split) hydraulic jacks. The hydraulic system can control several creep test machine, The creep deformation test machine of which the pressure has been increase to rated level can be moved to another machine by adjusting the fixing nubs;
(3) The force measurement unit
The force measuring unit mainly consists of the compression sensors, connecting cable and high-precision digital display instrument.
5. The compression deformation system for creep testing machine
6. Packing List:
Main Unit |
1 Pc |
Pressure testing sensor |
1 Pc |
Load Gauge |
1 Pc |
Oil Pump |
1 Pc |
Oil tank |
1 Pc |
Instruction manual, certificate of quality |
1 Pc |
Product name : Concrete Creep Testing Machine
Nanjing T-bota Scietech Instruments & Equipment Co., Ltd
You May Like
-
MOULD FOR CEMENT MORTAR(MADE OF STAINLESS STEEL)
-
50mm Steel Three Single Cube Mould
-
T-BOTA Concrete Carbonization Testing Cabinet Box
-
70.7 Three Gang Cube Testing Mould
-
150 mm Four Parts Cast Iron Single Cube Mould
-
Cast Iron Steel 150*150*150 One Gang Three Gang Concrete Testing Mould
-
150x150x150mm Cast Iron Three Gang Concrete Testing Mould
-
Plastic cast iron 150 Three Gang Concrete Testing Mould
-
Cast iron 70.7*70.7*70.7 Three Gang Concrete Testing Mould
-
Heavy weight 16Kg 4 part Cast Iron Laboratory Cube Mould
Popular Searches
Find Similar Products By Category
You May Like
- CBR test mould and accessories
- ASTM 2.27Kg Slotted Surcharge Weight
- Compression Test Single Cube Mould Cast Iron Single Cube Mould for Compression Test
- 150mm Cast iron Test Mould Cube Moulds
- 150*150*150 concrete 4parts 45degree Cube Mould
- 50*50*50 Three Gang Concrete Testing Mould
- 150*300 Mild Steel Cylinder Moulds
- China 150*300 100*200 Cylinder moulds of Concrete testing equipment
- Export Packing ASTM Good Quality 2.27Kg Slotted Surcharge Weight Soil CBR mould and accessories
- 50 Three Gang Concrete Testing Mould
- China Concrete Test Cube Mould Prism mould 40x40x160 three gang mould
- Tube Electric Sand Equivalent Shaker Sand Equivalent Test Apparatus
- 1m Concrete magnetic non magnetic Vibrator Table (ZT-1*1)
- Chinese Concrete steel beam mould for accurate specimens steel beam mould
- T-BOTA 150*150*150mm Four Parts Single Cube Mould for Compression Test 16kg Iron Cube Mould