HZ2631 Common Rail Diesel Fuel Injector Pump Test Bench

1 Introduction

CRS960 (Common Rail System CRS960) common rail control system by controlling the operation of the common rail test bench to complete the common rail pumps, common rail injector, high-pressure fuel rail test. Wide range of equipment, can be widely measurement Bosch, Denso, Delphi, Siemens and other common rail pump and injector, the injector system is equipped with more than 1600 injectors data, in maintenance and inspection can be used as a reference value or reference value, allowing users repair work more convenient.

2 Product Features

CRS960 common rail control system components can be flexibly matching, to form different control platforms to meet the functional, cost, size, and many other needs, to achieve the highest price. In addition the device driver parameters can be flexibly adjusted to suit the pump and injector testing special models, ease of maintenance personnel working status Common Rail System judge and maintenance. The system can also be extended, such as centralized management of multiple devices, unified data reporting, especially for common rail device manufacturers batch testing.

The high-pressure fuel rail test

1. provide Bosch, pre-calibrated value Delphi, Denso, JIER rail pressure sensor

2. users can add new sensor type oil pump, and a pressure sensor for different display value recalibration

3. rail pressure automatic control

4. rail pressure is too high will active the automatic protection

Common Rail Injector Test

1. Measure up to 6-channels solenoid valve injector

• High Voltage - Bosch, Denso injector

• Low Voltage - Delphi injector

2. Measure 1 channel Siemens, Bosch piezoelectric crystal (PIEZO) Injector

3. all channels solenoid and piezoelectric crystal drive with short circuit protection, will not damage the controller and measured injector

4. provide standard test steps and conditions for each standard fuel injection and back data, synchronized display. Users can also customize the working steps, add or change the experimental data, the system comes with more than 1,600 pieces of standard data (and in continuous update)

User Interface and Interface

1. Support 10-inch / 15-inch / 17-inch / 19-inch touch-screen operation;

2. Multi-language-friendly interface display, user-friendly operation;

3. Real-time working status feedback, allowing users to make decisions faster;

4. powerful database management features more than 1,600 injectors standard data;

5. can be accessed by a standard keyboard and mouse;

6. equipped with ultra-compact industrial computer, SSD solid state drive for data backup, system software updates and data upgrade;

7. system functions cropping flexibility can be combined into a variety of control systems;

8. precision digital dipstick to ensure test accuracy;

9. Different injector with a different adapter, connects users to a different injector

3 Test preparation and before precautions

Notes

In the case of the device is powered, non-swap CRS960 control system plug and the connecting cable, the control system may cause damage or loss of data, so that the

device can not run. Should connect the device to check before energizing the system is correct, confirmation and then do the following steps.

1. before the pump is installed to clean the pump.

2. before installation the injector make sure its cleaned.

3. external damage in time to check the pump.

Strictly prohibited damaged pump mounting up for testing.

4. installing the pump to the test bench.

! Using special clamps and couplings for this operation.

Common Rail Injector (INJ) Test Preparation

1. High-pressure hose connected to the injector;

2. Injector electrical connector joints;

3. Connector Injector pipe, return pipe;

4. Close all safety guards;

5. Setting conditions to start measuring the measurement mode is selected.

From the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services. The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options.

HuaZheng Electric Manufacturing (Baoding) Co.,Ltd is  founded in 2008,the supplier of the State Grid in China.It means we are the supplier of the Chinese Government.And our products spread throughout the whole China.

Our main products : Insulation Oil Tester, Cable Fault Locator, High Voltage Generator,transformer tester, relay protection tester,insulation resistance  tester,Power Quality Analyzer and so on.

Close to Tianjin port, the transportation is convenient. our customers come from More than 50 countries, like America, England, Bulgaria, Brazil, Chile, Malysia, Vietnam and so on.

What's more, gurantee 1 year,life long maintance .Products through the CE, ISO, IEC certification, quality and reliable, factory price.

Warmly welcome all partners to join us for mutual benefits cooperation.