XBD-619D Diesel Fuel Injection Pump Test Bench
Usage:
1 Test oil supply condition
2 Test oil supply starting point and interval angle
3 Test governor working performance
4 Test pressure compensation performances
5 Test distribution pump working performance
6 Test cold starting device and solenoid valve performance
8 Test injection pump seal performance
10 Test oil transfer pump self priming performance
Name and Model | System | Specification Details | Remarks |
XBD-619D Pump Test Bench | Technical Data | 1, Host machine power : 5.5KW ,7.5KW,11KW,15KW,18.5KW,22KW 2, The principle axis revolution: 0-4000r/min. 3, 12 cylinders pumps can be tested. 4. Automatically computer control and display by screen. 5. Oil metering counting : 0-1000 times , one gear per 50 times 6. Oil pressure meter 1.5 grade : 0-0.6Mpa, 0-6Mpa, 0-0.16Mpa, 0-1.6Mpa. 7, Big measuring cylinder: 150ml Small measuring cylinder: 45ml 8, Oil tank volume: ≥ 40L Oil supply: ≥ 10L/Min Oil filter precision: 5μ 9, Principle axis revolution fluctuate: ±1r/min | Attached tool box, the service tool and special tools, “T” Type test bench, low noise and economical |
Protection | Under voltage, over pressure, super heating and over loading protection function | ||
Electrical equipment | 1. It has built-in electrical box and convert box. 2. Short-circuit protection. | ||
Overall dimension | 2300×1160×1750mm L/W/H | ||
Weight | Net weigh: 1150kg. |
According to the different pump. The test bench use proper attachment, and carry out the following debugging
1 Test different cylinder oil supply condition quantity and oil supply evenness under different rotation speed
2 Test oil supply starting point and interval angle
3 Governor working performance checking and regulation
4 The pressure compensation performance test and checking
5 The distribution pump working performance test and regulations
6 The cold starting device and solenoid valve performance checking
7 The distribution pump oil return test under different rotation speed (optional)
8 The distribution pump inner pressure test under different rotation speed
9 The injection pump seal performance test
10 Check the oil transfer pump self priming performance
11 Save, amend oil injection pump debugging date and form database
12 The commons diesel injection pump debugging data quick inquiry
13 The oil pump speed governing curve create automatically and CRT end display
14 The built-in high reliability horizontal type inflation pump
15 Three “T” type working bench, wide location bracket, with steady running
16 The attached too box ,the service tool and special tool is conveniently taken!
III The main technical data of pump test bench
1 The principle axis rotation speed: 0-4000r/min. the two directions are optional
2 It can test oil injection pump cylinders is 12
3 The principle axis rotation speed fluctuate: ±1r/min
4 The host machine power : 5.5KW ,7.5KW,11KW,15KW,18.5KW,22KW.
5 The oil supply drive motor power: 1.1KW
6 Principle axis center to center spacing working bench height : 125mm
7 The oil metering counting : 0-1000 times , one gear per 50 times
8 Rotation speed .counting, toothed bar stroke, in advance angle: four digital display
9 The pressure, oil temperature display : three digital display
10 The oil temperature automatic control : 40°C±2°C
11 Gas source pressure: 0-0.25Mpa
12 The oil tank volume : ≥ 40L
13 The oil pump oil supply : ≥ 10L/Min
14 The oil filter precision : 5μ
15 The glass measuring cylinder volume:
Big measuring cylinder: 150ml
Small measuring cylinder: 45ml
16 The oil pressure meter 1.5 grade : 0-0.6Mpa;0-6Mpa;0-0.16Mpa;0-1.6Mpa.
17 The standard injector: ZS12SJI
18 Cooling method: forced wind cooling
19 Test bench overall dimension (mm): 2300×1160×1780
20Test bench weight: 1200Kg.
