Hot selling Helmet Rigidity testing machine/Helmet testing machine/Helmet deformation testing with PLC control
Purpose
It's for testing the rigidity of a helmet, measure the extend of deformation after applying a certain load on a helmet
Function and feature
1.According to ECE R 22.05 standard
2.For testing the rigidity of a helmet , measure the extend
Of deformation after applying a certain load on a helmet
3.PLC controlled
The Main Technical Parameter
| Product Name | Hot selling Helmet Rigidity tester/Helmet testing machine with PLC control |
| Testing standard | ECE R22.05 |
| Function | Used for helmet's lateral rigidity testing |
| Initial load | 30N |
| Testing force ways | Big capacity force sensor |
| Control ways | PLC control |
| Display ways | Touch screen display |
| Electricity | 220V 50HZ |
Test Procedure
1. An initial load of 30N shall be applied
2. At a minimum plates speed of 20mm/min, and after two minutes the distance between the two plates shall be measured
3. The load shall then be increased by 100N
4. At a minimum plates speed of 20mm/min, and then wait for two minutes
5. This procedure shall be repeated until the application of a load of 630N
You May Like
-
Water immersion testing Machine/Testing chamber/Testing equipment for helmet
-
Vertical spacing Wear Height Tester for safety helmet
-
Safety Helmet Impact Testing Machine/Safety helmet absorption impact tester
-
Strap Strength Testing Machine/Helmet testing equipment/Dynamic strap retention testing machine for helmet
-
Lateral Rigidity Testing Machine/Helmet rigidity testing machine with PLC control
-
Rotate Aluminum Headform/Rotation half headform
-
Helmet Impact Absorption Tester / Uniaxial triaxial helmet impact testing machine/Helmet impact attenuation laboratory testing
-
Helmet impact testing machine /Bike helmet impact testing equipment/Helmet testing machine with computer control
-
Motorcycle helmet Impact Testing Machine/Helmet Testing equipment with ECE R22.05, EN1078,EN1077 etc testing standard
-
EN397 standard Shock absorption testing machine for safety helmet
Popular Searches
Find Similar Products By Category
You May Like
- ANSI Z89.1Safety helmet Impact Testing Machine/ Helmet shock absorption testing machine/ Helmet testing equipment
- ANSI Z89.1 standard Safety Helmet Force Transmission Test apparatus
- Helmet Anti Drop off testing machine/Helmet stability testing/Helmet retention detaching testing machine for IS 4151 ECE R22.05
- ECE R22.05 standard 15kg weights motorcycle helmet Projection Surface Friction Testing machine
- Motorcycle helmet Strap Retention Machine/Helmet testing equipment
- EN ECE R22.05 standard Sand Spray Testing equipment/ testing machine for helmet goggles
- EN166 standard Helmet eye protector high speed Shooter Testing equipment
- ECE R22.05 Helmet Solidity Testing machine
- Uniaxial Impact Monorail Testing machine
- ECE R22.05 standard Motorcycle Helmet Monorail Impact Tester
- Tri-directional accelerometer Unidirectional accelerometer Twin Wire Impact testing machine/testing equipment for helmet
- Helmet Twin Wire Triaxial Free guide falling impact testing machine/ Helmet triaxial testing/ Helmet testing machine
- Twin Wire Triaxial Free fall guided impact testing machine
- Helmet Impact puncture testing machine /Strike testing machine/testing apprataus
- Helmet guided Impact penetration testing machine / Testing equipment With accelerometer