Application
IEC60332 electrical single wire and cable vertical burning tester
Standards:
•GB/T18380.(11-12)—2008---<Electronic cable and optical cable flame test under the flame conditions, single insulated wire and cable flame vertical spreading test>
•IEC60332—2004, instead of GB/T18380.1-2001
•GB/T5169.14-2007
This apparatus is for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fiber cable.
Technical parameters:
| outlooking | Stainless steel control cabinet, fume cupboard and metal cover is all-in-one type, which is easy to operate and good looking |
| Metal cover: | 1200mm(H)×300mm(W)×450mm(D). The front is open, the top and bottom are sealed |
| Blowtorch: nominal power: | 1kw |
| Control mode: | When the set burning time reaches the preset time, the machine stops supplying the fire automatically |
| Burning device: | automatic high pressure ignition |
| flowmeter: | 1.5~15L/min, a gas flowmeter, 0.1~1L/min |
| Flame detection device: | one imported thermocouple of diamter 0.5, K type, one electrolytic copper billet diamter 9mm, each one weight is 10g±0.05g, a suit of temperature and time display device |
| The separately controlled exhaust fan is installed at the top |
Specifications:
| Overall dimensions: | 600mm(W)×600mm(D)×2200mm(H) |
| Power supply: | AC 220V, 50/60Hz, 2A |
| Air source: | propane and air( prepared by users) |
| Flame standard | IEC60695-11-2,1kw nominal pre-mixed flame |
Burner Tube | IEC60695-11-2 Figure A |
Burning Angle | 45° |
Thermocouple | Type K (Ni/Cr - Ni/Al),200°~1050° |
Thermocouple Size O/D | 0.5mm |
Temperature Resolution | 1ºC |
Standard Copper Block | weight 10 ± 0 .05 g before drilling. Cu-ETP |
Gas Supply | Propane,min.95% purity |
Input Power | 220 V 50 Hz 3A or 115 V 60HZ Optional |
Inner Dimensions | W*D*H=300mm*450mm*1200mm |
Conform to standard | IEC60332-1-1,IEC60332-1-2,IEC60695-11-2 |
Detailed Images
You May Like
-
tracking index test machine
-
electronic test instrument IEC 60335 test foot probe fig 103
-
iec test equipment for testing thin-layer insulation material electric strength
-
bite force tester simulate the child's teeth test
-
Platen Washing Machine Door Durability Testing Equipment
-
iec60598 electrical appliance temperature ambient test corner
-
IEC 60950 GB5169.21 ball pressure testing device to test 20n pressure
-
IEC60950 Mandrel test device with 150N weight
-
Automotive wire sand abrasion resistance testing machine
-
UL 1310 IEC 60065 dielectric strength tester cb hipot test for laboratory
Find Similar Products By Category
You May Like
- IEC60068-2-31 tumbling barrel drop tester for mobile phone lifespan test
- ISO 8124-1 EN71 part 1 sharp point tester
- Glow wire loop iec60695 U shape for thermo resistance test
- Mask Tensile Testing equipment/Tensile strength testing machine price
- face mask melt-blown nonwoven Melt Flow Index MFI Testing Equipment
- Face Mask respiration tightness resistance tester Air Impermeability Tester
- Medical Mask Disinfection Machine UV sterilization furnace
- Face Mask filter particulate test machine with filter efficiency test
- Medical face mask gas exchange pressure difference testing equipment
- face Mask UV Sterilizer Mask Sterilization Testing Equipment
- Corrugated Paper Ring Cursh RCT Edge Cursh ECT Testing Machine
- IEC60068-2-75 spring impact test hammer with adjustable energy
- Quality Insurance! IEC60068-2-75 Spring impact hammer calibration test equipment
- Drop Ball Impact Strength Tester With High Quality On Hot Sales
- Discount sell! Impact Steel Test Sphere Test Ball 500g 50mm with ring