IEC60695 Needle Flame Burning Testing Equipment
1.Needle Flame Test Euqipment meets IEC60695
2.Can measure kind of materials
According to IEC60695, ZY3 Needle Flame Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, it is fit for the industry of insulation material, engineering plastics and solid combustible material.
Technical Parameters
| Technical Parameters |
Burner Angel | 0°, 20°,45° |
Flame Height | 12±1mm |
Needle burner | Height above 35mm, Stainless steel needle Φ0.9mm-Φ0.5mm |
Standard Copper Block | 0.58±0.01g |
Check time | 23.5±1S |
Temperature Test | MAX1050°C ±0.1% |
Thermocouple | RS (British), Type KΦ0.5, accuracy ±0.05% |
Gas variety | Butane or purity above 95%,Propane |
Installation and adjustment of the equipment
1: condition of Installation
a: the equipment should install in the table board and fume hoods,
b: Min. Size of the table board: Length 1400mm * Width 800mm * Height (600 to 800)mm
c: Boundary dimension: Length 1100mm * Width 700mm * Height 1300mm
d: the installation distance of the wall: >200mm will be better
e: Diameter of smoke vent: 100mm
f: Height of table-board keeps 600 to 800mm to convenience the operation
g: Independent test room with necessary exhaust system and fire protection equipment
h: Customer need to prepare the gas (Butane or purity above 95% Propane) and the hydrogen pressure reducing valve yourselves.
2: Adjustment
A: Leak test: check the gas circuit include Air source, Reducing Valve, whether the related adaptor is tightened
Close the Pressure Regulating Valve, and open the Gas Cylinder
Adjust the Hydrogen Pressure Reducing Valve smoothly, make the output pressure around 0.2MPa,
Adjust the control panel of “ Pressure Regulating Valve” and make the pressure gage not exceed 0.1MPa/1kg.
Close the Gas cylinder, wait for 5 minutes, and check the of pressure’s situation
Our service
1.High quality guarantee.
2.Shipment with professional documents.
3.Packing as your request, with photo before shipment.
4.Reply within 48 hours and provide solution within 3 working days
4.Professional after-service from our engineers.
5.Warranty period 12 monthes.
Our advantages
Professional technology support.
Full experience of large numbers containers loading in Chinese sea port.
Fast shipment by reputed shipping line.
Best service after shipment with emails.
Best knowledge about Safety Testor and other related machine in USA/UK/INDIA/AUSTRALIA/CANADA/SOUTH AFRICA ETC
We are professional test equipment manufaturer in China with excellent experience and skills, also have best quality products
Our concept
1.Client is first. We are trying to bring maximum profit to our clients and offer best quality products
2.Credibility is the most important.
3.Quality control is our life.
4.Great sense of responsibility.
We will not only supply products service to you but also help you solve any other problem what we can do ,we can meet in this large world is our fate ,so we have been friends ,looking forward to meeting you !
Our factory
If you need any other messages we are not show here ,please dont hesitate to contact us below ,we will glad if we can help you ,thanks !