iec 60695 glow wire flammability test with 0.5mm thermocouple
iec 60695 glow wire flammability test with 0.5mm thermocouple
Introduction:
The glow wire test chamber conforms to IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1, use no-flame ignition simulate the test. Heating up the glow wire loop, which material and shape is (Ni80/Cr20) and(Φ4 mm nickel chrome)by large current to the testing temperature 550C ~ 960C for 1min, then to heat the sample with 1N force for 30sec. To judge the fire fatalness of the electrical and electronic equipment or product by to see whether the sample is ignited or how long is the burning time. The tester can test the ignitability, flammability , GWFI and GWIT of solid insulated and combustible material.
The glow wire test chamber is widely used for testing the electrical and electronic product like lighting equipment, low-voltage apparatus and electrotechnical instrument.
Specification:
1, The glow-wire temperature: 550 ~ 1000C adjustable, when 500 ~ 750C ±2C, when 750 ~ 1000C ± 5C
2, Burning time: 0-999.9s ± 0.1s adjustable (usually selected as the 30s)
3, Ignition time: 0-999.9s ± 0.1s, auto record, manual pause
4, Off Time: 0-999.9s ± 0.1s, auto record, manual pause
5, Thermocouple: K type thermocouples Φ0.5mm
6, The glow-wire: Φ4 mm nickel chromium wire.
7, Hot depth: 7mm ± 0.5mm (1N ± 0.2N maintaining the pressure of hot into the sample)
8, Test speed: 14mm /s.
9, The testing process: test procedures automatic control, independent ventilation
10, The reference standard: GB / T5169.10, IEC60695, UL746A
11, Studio Volume: 0.5 m3
12, The device outside dimensions: 1000mm wide × 650mm deep × 1300mm high
How to order
1. Place the order and pay directly if you have no question to the product. 2. If you have some questions, don't bother to send me a message to ask. 3. After you have paid the money, we will deliver the goods as soon as possible. |
Packaging and Shipping
1. Aluminium box and carton box, careful and tight package, make sure the package is intact. 2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order. 3. The shipping time is different, it depends on the distance bewteen us. At usual, exclude the preparing time, the goods would be sent to you in 5days. |
You May Like
- iec60695-2-1 glow wire flammability index test chamber
- glow wire test apparatus iec60695 from China manufacturer
- IEC60695 Needle Flame Test Chamber
- ASTM-1149 ozone aging test chamber for rubber and non-metalic product
- IEC60068 Programmable constant temperature and humidity test chamber
- UL746A China Glow Wire Flammability Tester Apparatus
- IEC60068 Programmable high and low temperature and humidity test chamber
- IEC60529 IPX7 IPX8 Water Immersion Pressure Test Machine
- IEC60529 IPX7 IPX8 Waterproof tester with water tank
- IEC60529 IP5X IP6X sand and dust test chamber
Find Similar Products By Category
You May Like
- Waterproof Testing IEC60529 Standard IPX7 Immersion Tester
- IEC60529 IPX7 water immersion glass tank
- 120L climate corrosion test equipment used in salt spray testing
- IEC60529 IPX7 waterproof immersion test chamber
- Made in China IEC60695 Automatic Needle Flame Test Apparatus for laboratory test
- IEC60112 Comparative Tracking Index Tester for leakage current test
- Roller test-bed, mobile tumbling Barrel strength tester , roll decline tester
- Made in China IEC60529 glow wire tester/test chamber for electrical and electronic product
- IEC60529 glow wire equipment glow wire tester
- Salt Fog Spray Chamber for Corrosion Resistance Test
- Automatic Compression Testing Machine for Corrugated Box Packaged Carton
- Customizable Walk-in Environmental Chamber
- High and Low Temperature and Humidity Test Chamber
- Climate Constant Temperature and humidity Test Chamber
- High and low heat temperature and humidity test machine