IPX7 IPX8 continuous immersion water test chamber for IEC60529 standard
Standard:
Complies with IEC60529:2001 "Degrees of protection provided by enclosures (IP Code)", "Enclosure Protection Level (IP Code)" "Lamps Part 1: General Requirements and Tests" 9.2.9 The requirements of the terms;
Application:
The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under simulated rain conditions. After the test, it is judged whether the performance of the product meets the requirements, so as to facilitate the design, improvement, verification and factory inspection of the product.
Features:
1. Applicable to IPX8 testing of products.
2. The whole body of IPX8 pressure immersion test device adopts SUS304# stainless steel plate with high-precision overall sub-arc welding, the outer mirror polishing, the inner layer is rough and thrown, the appearance is beautiful, convenient and clean and durable.
3. Special silicone seal ring (elasticity willnever aging, can be used for ten years).
4. There is time control function, the setting time is: 0-999 minutes. When the test time is reached, the pressure will be automatically stopped, and the air in the tank will automatically drained. The tester can open the can lid and take out the test sample.
5. There is a water inlet valve and a drain valve at the bottom of the tank, and can connect with a 5 meter water hose, bottom also with 4 wheels for movement.
Specification:
Model |
BND-IPX8-100A |
BND-IPX8-120A |
|
Pressure Control |
Auto Adjustment |
Auto Adjustment |
|
Control Precision |
plusmn0.002Mpa |
plusmn0.002Mpa |
|
Pressure Adjust |
0.00-1.0Mpa
|
0.00-1.2Mpa
|
|
Simulated Depth |
0-100m |
0-120m |
|
Exhaust Pressure |
1.05Mpa |
1.25Mpa |
|
Max Pressure |
1.1Mpa |
1.3Mpa |
|
Precision |
0.001Mpa |
0.001Mpa |
|
Tank Thickness |
6mm |
8mm |
|
Fran Thickness |
30mm |
30mm |
|
Tank Diameter |
0.5m |
0.5m |
|
Tank Water Level |
1.0m |
0.75m |
|
Dimension |
600x780x1300mm |
||
Material |
SUS304# |
||
Time Control |
0-999Min |
||
Protection |
Pressure valve protection, Electric leakage protection |
||
Voltage |
AC220V |
||
Power Rate |
100W |
||
Weight |
150KG |
150 KG |
|
Standard |
IEC60529:1989+A1:1999,GB4208-2008,GB7000.1(IPX8) |
You May Like
- IEC60529 figure 5 IPx3/x4 water spray shower
- IEC60529 IPX8 air Pressure immersion water test machine
- IEC60529 Standard IPX5 waterproof tester Jet Nozzle
- IEC60529 IEC60335 IPX3 IPX4 waterproof testmachine
- IEC60529 IPX3 IPX4 waterproof test machine
- IEC60529 IPX12 to IPX9K waterproof test test equipment
- IPX3 Spray Nozzle for waterproof test
- iec60529 IPX5/IPX6 Rain Spray Testing Machine for Led light IPx56 test
- IEC60529 figure 5 hand-held device to verify protection against water
- IEC60529 water jet device for second characteristic numeral 6 with 12.5mm nozzle
Find Similar Products By Category
You May Like
- UL1598 45 angle Water Splash Test Device
- waterproof detection of ipx water spray test chamber
- IEC60529 IPX9K high pressure waterproof test chamber
- IPX1-4 comprehemsive vertical rain test chamber
- ipx5 ipx6 Spray water jets nozzle
- ipx5 ipx6 Spray water jets nozzle
- water jet hose nozzle figure 6 iec 60529
- Vertical drips test device IPX1 IPX2 iec60335 iec60529 rain spray test
- iec60529 ipx3 ipx4 handheld brass waterproof spray test nozzle
- outside led light waterproof spray tester ipx3 ipx4 nozzle
- IPX1-IPX8 water-proof test equipment
- BND-IPX34C IPX3/4 Oscillating Tubes Rain Test Equipment
- IPX12 vertical rain drop test equipment
- Ipx1 and ipx2 led lamp drip box with ce certificate
- ipx34 water rain ingress test chamber with touch screen