DZ3500S carbon black content tester

Introduction

New structure, one-piece structure. Take a unilateral sample, intake, temperature measurement. The exhaust end can be equipped with an automatic cleaning bottle. The cleaning bottle can be replaced by the user. The gas reaction can also be observed through the instrument window. The inlet end is sealed with a double seal ring structure to ensure the purity of the gas, and the sealing valve comes standard with air cooling. During the test, the sample can be cooled and dried internally to improve the experimental efficiency. The furnace body is heated with double wire windings to provide even heating and anti-aging.

Features

1. Take a unilateral sampling, intake, temperature measurement.

2. The exhaust end can be equipped with an automatic cleaning bottle. The user can replace the cleaning bottle and observe the gas reaction through the instrument window.

3. The inlet end adopts a double seal structure seal to ensure the purity of the gas, and the sealing valve is equipped with air cooling.

4. During the test, the sample can be cooled and dried internally to improve the experimental efficiency.

5. The furnace body is heated by double wire winding, heating more evenly and anti-aging. Avoid the drawbacks of the open cover furnace.

6. Furnace cooling is equipped with independent fan cooling to speed up the cooling rate and increase the cooling efficiency.

7. The test procedure is simple to take and sample, using the guide rail pull type, through the support guide rail, the sample is directly extracted. There is no need to open the sealing valve and there is no need to use other sampling tools to reduce errors in many links.

8. The atmosphere is automatically controlled, the program is switched, and the touch screen can be manually switched to make the operation more intelligent and convenient.

9. Select a suitable combustion enthalpy and test multiple samples.

10. Sample combustion boat guide-supported, located in the central area of the heater core of the furnace to ensure uniform heat around the sample, the test accuracy is higher. Avoid the disadvantages of non-uniform heating on the test tube that is placed directly on the traditional combustion boat.

11. Samples The combustion boat's sampler is marked with a scale and is custom-made to ensure that each time it is placed in the furnace, the same requirements as for sample placement are required in repeatability tests. The traditional carbon black content tester must mark, observe and then adjust itself, resulting in low efficiency and poor repeatability.

Technical Parameters

1. Display: HD 7-inch capacitive touch screen display

2. Tube size: 45×450mm

3. Heating element: high temperature resistant nickel chromium wire

4 heating zone length: 300mm

5. Constant temperature zone length: 200mm

6. Working temperature: ≤1100°C

7. The maximum temperature: 1200 °C

8. Temperature Control Mode: Intelligent 50-segment Programmable Control

9. Constant temperature accuracy: ±0.5°C

10. Sensitivity: 0.1°C

11. Heating rate: 1°C~50°C/min

12. Whole power: ≤1KW

13. Working voltage: AC220V/50HZ/60HZ

14. Atmosphere: Two Ways

15. Atmosphere switching: fully automatic