Powder Tap Density Tester GP-01
Suitable for: Powder metallurgy, powdered carbon, coke graphite, Bio-pharmaceuticals, magnetic materials, New energy materials, plastic, powdered milk and food dosage industry and soon.
Principle:
The machine is on the basis of ASTM B527, D4164, D4781, IDF 134, ISO 787-11, 3953, 8460, 8967, 9161, JIS K5101-12-2, Z 2512, MPIF 46, USP<616>Part II, BSIB 527, GB/T 21354, 5162, 14853 and soon.
Technical data:
The apparent height of powder, pellet and film materials relies on the accumulation mode of pellets, in the process of tapping, the small pellet flows to the two big pellets. Thus the package of the pellet products will be more economic, the powder volume decreases, the tapping density increases, it can access to 50%-100% generally.
Functions:
For cooperating with research institutions, the functions of continuous tapping and counting setting are increased, it can be chosen by customers freely.
The measuring of this machine is achieved by tapping regularly the measuring barrel which contains powder. After users choosing the filling volume, the tapping action can start, when changes happen, the reading will be showed. This tapping is finished by up-down tapping of measuring barrel at the specific tapping strength and appointed distance. In the process of tapping, the machine will separate the block matters, and then minimize them when tapping down, and the transparent glass filling pipe can be helpful for observing and reading the measuring value. Specifications:
Model: GP-01
Function setting: A. Counter 0-999 times dip switch setting, power-down automatically
B. Continuous tapping setting
Amplitude: Can be adjusted from 3 to 30mm/m
Tapping times: Can be adjusted from 15 to 320 tap/min
Size/ Weight: W180*D300*H230 m/m,5.5 kg
Power: AC 110/220 50/60Hz
Counting sense: Photoelectric Sensor
Measuring tubes: 25, 100, 250(ml) measuring tubes are standard accessories
