Pressure decay burst strength tester for package is suitable for the quantitative determination of sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. The Burst Strength Tester can also be usedto determine the sealing performance of pilfer-free bottle caps and soft tubes.
This SealStrength Testing System conforms to standards of ISO 11607-1, ISO 11607-2, ASTMF1140, ASTM F2054, GB/T 10440, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002 .
Principle
The threetest modes of the positive pressure method, which Burst Strength Tester satisfies are as follows:
A. BurstTest: Burst Strength Tester internally pressurizes the packages until thepackage fails. The test pressure is the maximum pressure detected before thepackage fails.
B. CreepTest: Pressurize the package internallyto a specific pressure and maintains this pressure for a specific time. Thetest measure is pass/fail.
C. Creepto Failure: The package is creep-tested and held until the package fails. Thepressure setting is higher than that of the creep test to ensure the packagefails in some time. The measure is the time until failure.
Pressure decay burst strength tester for package Features
1. Three test modes of burst,creep and creep to failure are available on Burst Strength Tester.
2. PLCprogrammable logic controller realizes precise pressure and time control.
3. 7inch TFT touching screen for convenient parameter setting and test operation.
4. Multiplegroups of test parameters can be save to avoid the repetitive setting time.
5. Testresult auto statistics and storage.
6. Programcustomization available.
Burst Strength Tester TechnicalSpecifications
PressureRange 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard)
InflatingHead Φ4mm (Standard)
GasPressure 0.4 MPa~0.9 MPa
PortSize Φ6 mm PU hose
Dimensions 400mm (L) × 270 mm (W) × 180 mm (H)
PedestalSize 375mm (L) × 275 mm (W) × 345 mm (H)
Power AC 220V 50Hz
Burst Strength Tester Standards
ISO11607-1, ISO 11607-2, ASTM F1140, ASTM F2054
