promotion chinese manufacture Labsans electronic torsion testing machine /torsion tester

 

Main functions:

This series of testing machine is suitable for the torsion test of metallic materials, non metallic materials, composite materials and components. Test and provide data for the national standard "GB/T10128-1998 metal room temperature reverse test method"

Meet the standard:

GB/T10128-1998 "metal room temperature torsion test method"

Application industry: 

Measurement and quality control; metallurgical steel; mechanical manufacturing; civil aviation; high school; Scientific Research Institute; commodity inspection and arbitration, technical supervision departments; building materials ceramics; petrochemical industry.

 

 

 

Technical parameters:

 

Model		LD31.202
Measurement parameters	Maximum torque	200Nm
	Torque measurement range	2 Nm -200 Nm
	Test machine level	1/0.5
	Relative error of torque	±1%(1)/±0.5%(0.5)
	Torque resolution (Nm)	Maximum torque 1/300000
	Torsion angle measuring range	0-10000°
Control parameter	Torsion angle indication relative error	±1.0%
	Torsion angle resolution	0.0045°
	Relative error of torsion angle	±1.0%
	Torsion speed	6°/min -720°/min
	Relative error of torsion	Set value±1.0%
	The maximum distance between chucks	300mm
	Sample parallel section diameter	φ6mm-φ16mm
Other	Motor power	0.2 kW
	Power Supply	220±10%V/50Hz
	Machine dimension	1000mm×520mm×500mm
	Machine weight	300kg

 

 

Original configuration:

Special twist device 1 sets

Scalable configuration:

The microcomputer controlled electronic torsion testing machine can be used in accordance with the test standard or test sample provided by the customer or the test sample to choose the fixture or special design of the fixture and the accessories, the cost of the other.

Main features:

 

1: the use of high-speed DSP platform, its high integration, powerful control, data processing ability, high reliability, is the use of other processors can not match the test machine.

2: can be carried out in the torque, torque, etc., and other rate control and maintain.

USB1.1 6: communication, communication rate is 12Mb/s, the use of full speed mode, bulk transfer mode.

7: system board uses 4 layers of PCB unique anti interference routing method, strong anti-interference ability.

8: in addition to the power interface, the other interfaces are using the standard USB interface, plug and play interface such interface can be realized hot swap, that is, plug and play function. Interface features can be set up by software online. The interface neat layout reasonable, convenient plug.

9: the whole control system has a very high cost, high reliability.

10: the whole test process is controlled by microcomputer, and the real-time dynamic display of torque, torque, torque angle, torsion speed and test curve is used.

11: uses microcomputer for data processing and analysis. The test results can be saved automatically. After the end of the experiment, the test curve can be re - up.

12: full Chinese Windows platform under the test software, with a strong data and graphics processing functions, can print out the complete test report and test curve.

13: with the perfect overload protection, emergency stop and other safety protection function.