Laboratory Appliance Feeler Gauge For Creepage Measurement IEC60335 Creepage scaleplate, High Quality Creepage Measurement

Feeler Gauge For Creepage Measurement IEC60335 Creepage scaleplate, High Quality Creepage Measurement

Specifications

1.Standards:IEC60598 IEC60335 IEC60601 IEC60065 
2.8sizes and 27 sizes,provide customized size 
3.material:stainless steel 

1.Basic introduction

• The Gauge Set measures creepage and clearance distances, distances through insulation and other spacings. The set can be used for compliance testing of electronic equipment and other products as required by all internationalstandards.
• It is used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements.
• Creepage distance test card or feeler gauge is made of whole stainless steel.

  2.Dimensions:

   

  AUTO-PD8	1.0/1.5/2.0/2.5/3.0/4.0/6.0/8.0/mm
  AUTO-PD27	1/1.1/1.2/1.3/1.4/1.5/1.6/1.7/1.8/1.9/2.0/2.5/2.8/3.0/3.2/ 3.3/4.0/4.5/5.0/5.5/6.0/6.3/6.4/7.0/8.0/9.0/10/mm
  Standards	IEC60598 IEC60335 IEC60601 IEC60065
  Customized size are offered.

   

•     Creepage Distance Gauges for gauging the creepage and clearance distances in dead state between parts under voltage in the operating conditions as well as between touchable metal pieces and parts under voltage in the operating conditions e. g. in installation material, switchgears, plugs, socket-outlets and electric appliances
  according to IEC and CEE Publications, EN Standards, VDE Specifications

Standard Outfit:

1 gauge block, cross section approx. 1 mm x 1 mm, distances between measuring
faces by agreement from 1 mm to 8 mm with a tolerance of -0.02 mm,
with shaft, cross section approx. 2 mm x 1 mm,
and with grip, approx. 12 mm x 40 mm x 1 mm,
rounded, with bore and engraving
(distance / mm, e. g. "5,0").

Design: made of spring steel, hardened and browned, measuring faces ground plane
parallel, total length approx. 70 mm,

with XY = distance between measuring faces in 1/10 mm. Example: the article no. of the
creepage distance gauge having a distance between measuring faces of 3,5 mm

Assotments :

Creepage Distance Gauges Bunch A

with 8 creepage distance gauges:
1,0 - 1,5 - 2,0 - 2,5 - 3,0 - 4,0 - 6,0 - 8,0 mm,

Creepage Distance Gauges Bunch B
with 15 creepage distance gauges:
1,0 to 8,0 mm in steps of 0,5 mm,

In some publications, standards and specifications, there are distances to be gauged,
which are beyond the distance range chosen for  creepage distance gauges. To
gauge distances below 1 mm, we recommend to use feeler gauges.

creepage distance gauges for other distances:

Our Services

 Qualifications and Certificates

1.Qualification of ISO9001
2.Certificates:ISO17025,CNAS,ILAC,SGS,Factory Reports,the third party calibration
3.Advantage:own factory,with high quality and reasonable price
4.Delivery:3-5days after receive your confirmation
5.Warranty:one year
6.After sales service:Available

 

1.How to choose the most suitable products?

Our professional team will give you the best suggestion,when you need some products to make the test,just be patiently to tell us the information about your test sample,the parameters your required.Our team may help you to find the best one.

2.How can I make sure for your quality?

Don't worry about that,we can also offer you the third party calibration as your requirements,all products can be sent to  Metrology Institute.And also,our factory have pass ISO9001 and CE  and SGS test.Also with the the calibration of CNAS,ILAC.

3.How long does the warranty takes and what are the after sales services?

Usually,our warranty is one year,but also it can accordingly lasting as your requires.In the period of warranty,we may offering the parts replacements,repairing and technique support,necessaryly,our engineer may go to the local country to service.

If you still have question,please feel free to contact us.