SS8687 series HDMI cable tester
SS8687 series HDMI cable tester
Description of SS8687 series HDMI cable tester:
The SS8687 series HDMI cable tester is used for test and measure wire cable harness,wire harness, like as : auto cable,audio cable, power cable, network cable, telephone cable, USD cable, HDMI cable,video cable, etc. .
Feature of SS8687 series HDMI cable tester:
Test function of SS8687 series HDMI cable tester:
| Item | Symbol | Test range |
| Resistance | R | 0.01Ω~10MΩ |
| Capacitance | C | 10pF~1000μF |
| Diode | D | 0~8V |
| Conductance | COND | 1mΩ~50Ω |
| Insulation | IR | 1MΩ~1.5GΩ |
| Hipot | I.L. | 0.01mA~5mA |
| Open/Short | O/S | |
| Capacitor phase | P | |
| Intermittent O/S | ||
| Intermittent Cond. | ||
| O/S End Judgement |
| Advanced Functions | Programmable Sequential Test |
| Auto Pin Search | |
| Self Diagnostic | |
| Self Calibration and Offset | |
| Basic accuracy | ±1% |
| Scanning mode | Auto/Manual Switchable |
| Meas. Frequency/ Voltage | 100~100kHz, 1Vac |
| Meas. Signal | 5Vdc / 50mA max. ±5% |
| Hipot | 50~1000Vac. ±5% / 0.01~60sec Set up |
| Insulation | 50~1500Vdc. ±5% |
| Meas. Connection | 128 Testing Points (256 for Optional) |
| Hipot Calibration +/- Output | |
| Auto Pin Search Jack | |
| Front Panel Buttons | Syskey / Fastkey / Editkey |
| I/O Interface | RS-232 Port |
| Printer Port | |
| Remote Control Port | |
| Memory | 512KB SRAM, Battery Backup |
| Power | 115/230Vac 60/50Hz ± 10% Switchable |
| Accessories | Auto Pin Search Probe |
| Fixture Cable | |
| Power Cord | |
| Users' Manual | |
| Remote Control Cable (Optional) | |
| RS-232 Cable (Optional) | |
| Temperature humidity | 15°C~35°C. RH >=75% |
| Dimension (WxHxD) | 425 x 190 x 350mm |
| Weight | 14kgs (W/O Fixture) |
| Cable request | 1μF Max. |
| Ordering information | 4- Wire Universal Cable / Harness Tester |
| SS-8687N | DC1000V |
| SS-8687NA | DC700V / AC 500V |
| SS-8687F | DC700V |
| SS-8687FA | DC1500V / AC1000V |
| SS-8687FAC2 | 256 Points |
Pictures of SS8681 series HDMI cable tester
Service tenet
Provide you the best service with “fast + satisfactory + safe”.
Warranty period
12 months long after the user received the product.
Warranty items
Only for abnormal breakdown caused by the machine design or manufacture defect,
free repair and accessory will be provided.
Technology service ability
All service engineers with many years experience are gotten special technology training, who can deal with various breakdown problem.
Guide the user to use accurately and how to maintain the product.
Provide free consultation about production process technology of electronic products.
Service after sell
In order to guarantee the machine used normally, we’d have training on how to operate, use and maintain our product by English manual, video, guiding on line.
Use instruction
Apply for the right complete size of product, otherwise, the wrong dimensions will affect the use effect.
Do ensure using the product accord to the use instruction completely.Do not exceed the scope of application of the products.
Maintain the product after use,Damp proof, rust proof, leak proof, explosion-proof, regular maintenance and inspection should
be taken care. All done help to extend the use period.
User document management
Establish perfect user document management in EPR system, Every product running details would be followed to manage. The users would be taken good care.
About product
1. Product photo: All product photos are taken by real product, There is the color aberration between the product and photo, which is caused by shoot light, product size, manual technology and computer display etc. It’s not quality problem. Parts of products are changed in appearance due to technology revolutionary and process improvement. SanShine would ensure the parameter of product is unchanged, The product couldn’t affect to use.
2.Product size: All parameters are all measured by manual just for reference. There is a small deviation due to the difference of measure tools, lot products and produce process. Real size should be accordance with the final delivery product.
3.Quality inspection: All products should be inspected strictly before shipment. Ensure the good function and appearance.
Package and transport
General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods as machine equipment etc, we have special skilled carpenter, who would make the proper wooden case with exact thickness,density,length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock. We will inform you the delivery note. You just need to wait for phone call, then pick up the goods at the nearest logistic station .(Please let me know in advance if you want get the goods at home.)