Bently Nevada, description about USA original Proximity Monitor 3500/42M -04-CN bently nevada proximity seismic monitor on China Suppliers Mobile

3500/42M -04-CN bently nevada proximity seismic monitor

Desctiption

The 3500/42M Proximitor/Seismic Monitor is a 4-channel monitor that accepts input from proximity and seismic transducers, conditions the signal to provide various vibrations and position measurements, and compares the conditioned signals with user-programmable alarms. The user can program each channel of the 3500/42M using the 3500 Rack Configuration Software to perform any of the following functions:

• Radial Vibration

• Thrust Position

• Differential Expansion

• Eccentricity

• REBAM*

•Acceleration

• Velocity

• Shaft Absolute

• Circular Acceptance Region

Specification

Inputs
Signal	Accepts from 1 to 4 proximity, velocity or acceleration transducer signals.
Input imedance Standard I/O	10 kΩ (Proximitor and Acceleration Inputs).
TMR I/O	The effective impedance of three Bussed TMR I/O channels wired in parallel to one transducer is 50 kΩ.
Power Consumption	7.7 Watts, typical.
Sensitivity Radial Vibration	3.94 mV/µm (100 mV/mil), or 7.87 mV/µm (200 mV/mil).
Thrust	3.94 mV/µm (100 mV/mil), or 7.87 mV/µm (200 mV/mil).
Outputs
Front Panel Leds	Indicates when the 3500/42M is operating properly
TX/RX LED	Indicates when the 3500/42M is communicating with other modules in the 3500 rack.
Bypass LED	Indicates when the 3500/42M is in Bypass Mode
Transducer Power Supply	-24 Vdc

USA original Proximity Monitor 3500/42M -04-CN bently nevada proximity seismic monitor

Product Features

You May Like

Find Similar Products By Category

You May Like