1.PT112 melt pressure transducer Brief introduce:
mainly used in measuring and control melt on high temperature condition, which has a widely range:0~5MPa~100MPa any to choose;
High measuring accuracy:+0.5%FS ; +1.0%FS ;
Temperature drift:≤0.30Mpa/100℃;
Output signal:2.0mV/V, 2.5mV/V , etc
This series product has high accuracy, stable, fine output signal, and dynamic feature, universality. Widely used in petroleum, fiber, plastic, rubber.
Parameter:
1:pressure range:0~5MPa~100MPa any to choose
2:accuracy: +0.5%FS ; +1.0%FS ;
3:working voltage: 10VDC(6--12VDC);
4:output signal: PT111series:2.0mv/v, 2.5mV/V PT1116 series:3.0mv/v, 3.33mV/V
5:check mode: 80%FSO+1%;
6:max temperature of probe can resist: 300℃
7:temperature drift: ≤0.30Mpa/100℃; high temperature melt pressure transducer
8:electric connection: PT111-series:universal 5core plus-in;PT1116 series:military 5 core plus-in .
9:over pressure:1.5*FS high temperture melt pressure transdcuer
10:electric connection:1/2"--20UNF ,M14*1.5 ,M22*1.5,G3/4,etc screw plus-in
11:ant-corrosive and wearable:suitable for measuring pressure on high concentration coarse condition, so it can improve 3-5 times longer time.
Special requirement or design can customize, all for our customer’s benefit!
2.PT123 melt pressure transducer
PT123 series high temperature melt pressure transducer are applied to measure and control the pressure as well as temperature of those high temperature fluid medium of extruders for such as fiber, polyester, rubber, plastics.
Rigid rod, Metal hose for isolation, Anticorrosion and wear resistance coating extends its service life by more than 5times.
Parameter:
Pressure ranges: 0~5MPa~200MPa
Accuracy:< ±0.5% FS; < ±0.25% FS
Signal output:1.5mv/v,2.0mV/V,3.3mV/V
Working voltage:10VDC(6--12VDC)
Calibration:80%FSO+1% high temperature melt pressure transduer
Temperature resistance of probe:450°C
Overload pressure:1.5*FS melt pressure transducer
Combined error: ≤0.30Mpa/100°C
Connector: common 5pin connector
Standard threading: 1/2-20UNF, M14x1.5, M22*1.5,G3/4 ;other versions on request
melt pressure transducer got CE Approved
3.Melt pressure sensor-550℃ for supper high-temperature Feature:
With more than 10 years constantly development, since march 1998 ,we have used our autonomous-making diaphragm ,which makes melt pressure sensor’s temperature drift decreasing rapidly, and it can used in acid and alkali. Compared with the original product, it has 5 to 10 times longer working life. So we persist to be the leader of domestic trade, and we have reached the international standard. Now ,we has many foreign orders to more than 30 countries of EU andNorth America. PT series melt pressure sensor is used in fiber and plastic modeling, petrifaction and other industries’ measurement and control of flow’ pressure. Our company absorbs oversea occupant company’s advanced technical, imported material and key element to produce. As result, it has stable reliable working parameter: high accuracy, nice output signal and dynamic feature, a good heat resistance, a little zero point drift. PT series melt pressure sensor with our autonomous PW series transmitter’s supporting can fulfill various requirement, it also can supporting imported meter. No need to change or adjust, connector and interface is all compatible.
Technical parameter:
This series product mainly used in various supper high temperature melt pressure condition’s measurement. This product uses special transfer way and medium material. So the measure range rise to 538℃from 400. now our product has exported to more than 30 countries of EU and North Amer
4.Melt pressure transducer –economic series
Technical parameter:
This series product mainly used to measuring on strict for data condition. It adopts special material and elastic alloy diaphragm, decreasing the temperature drift, raising the measuring accuracy. Its performance has reached the international same product level. Now it has exported to more than 30 countries of EU andNorth America.
5.Melt pressure sensor explosion-proof
Technical parameter:
This series product mainly used in measuring melt pressure on flammable condition. Assembling anticorrosivement, ant-weatment, and high accuracy, it has superb ant-interference feature, which has reach the international standard. Now it has exported to more than 30 countries of EU andNorth America.Melt pressure sensor explosion-proof high temperature melt pressure transdcuer
6.PT111 high temperature melt pressure transducer/sensor
PT111 series high temperature melt pressure sensors are the ideal choice for petroleum ,fiber,plastics,rubber extrusion applications, as they are reliable with high accuracy, wide measuring range and stable working performance.Wuyue's PT111 series transducers are the most commonly used alternate fill melt pressure transducer in the world. The wear resistance and corrosion-proof coating extends 3 to 5 times the service life. We can also design and produce on your special requirement.
PARAMETER:
Pressure ranges:0-5 to 0-1000 bar / 0-1500 to 0-15000 psi
Accuracy:< ±0.5% FS; < ±0.1% FS
Signal output:2.0mv/v, 2.5mV/V
Working voltage:10VDC(6--12VDC)
Calibration:80%FSO+1%
Maximum temperature:300°C
Overload pressure:1.5*FS
Combined error: ≤0.30Mpa/100°C
Connector: common 5pin connector
Wuyue's melt pressure transducer got CE Approved
