Specifications
1.Economical models with electrical equipments2.Output voltage:5V 7.5V 12V 13.5V 15V 24V 27V 48V
3.Efficency>70%
1. Features
1.Low price and high reliability
2.105 output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave
2. Specification
| Specification | S-201-5 | S-201-7.5 | S-201-12 | S-201-13.5 | S-201-15 | S-201-24 | S-201-27 | S-201-48 |
| DC output voltage | 5V | 7.5V | 12V | 13.5V | 15V | 24V | 27V | 48V |
| Output voltage error (Note2) | ±2% | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated output current | 40A | 26.5A | 16.5A | 14.7A | 13A | 8.3A | 7.4A | 4.2A |
| Output current rage | 0-40A | 0-26.5A | 0-16.5A | 0-14.7A | 0-13A | 0-8.3A | 0-7.4A | 0-4.2A |
| Wave and noise(Note3) | 150mV | 150mV | 150mV | 150mV | 150mV | 150mV | 200mV | 240mV |
| Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note5) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 200W | 198.75W | 198W | 198.45W | 198W | 199.2W | 199.8W | 201.6W |
| Efficiency | 73% | 76% | 79% | 79% | 80% | 81% | 82% | 83% |
| Adjustable range for DC voltage | 4.5-5.6V | 6-9V | 10-13.2V | 12-15V | 13.5-18V | 20-26.4V | 26-32V | 41-56V |
| AC input voltage range | 90~132VAC/186~264VAC SELECTED BY JUMPER OR SWTCH 47~63Hz;254~370VDC | |||||||
| Input current | 4.5A/115V 2.5A/230V | |||||||
| AC impulse current | 25A/115V 50A/230V | |||||||
| Leakage current | <3.5mA/240VAC | |||||||
| Overload proctection | 105%~150%. Type:PULSING HICCUP SHUTDOWN Reset: auto recovery | |||||||
| Over-voltage protection | 5.75-6.75V | 9.4-10.9V | 13.8-16.2V | 15.5-18.2V | 18-21V | 27.6-32.4V | 33.7-39.2V | 57.6-67.2V |
| High-temperature protection | RTH3>=90°C OUTPUT SHUTDOWN | |||||||
| Temperature coefficient | ±0.03%°C(0~50°C) | |||||||
| Setup rise hold up time | 200ms,100ms,20ms | |||||||
| Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES | |||||||
| Withstand voltage | Input and output interval:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||||
| Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure:500VAC/100M Ohms | |||||||
| Working temperature and humidity | -10°C~+50°C,20%~90%RH | |||||||
| Store temperature and humidity | -20°C~+85°C,10%~95%RH | |||||||
| Overall dimension | 215*115*50mm | |||||||
| Weight | 0.9Kgs/pcs | |||||||
| Safety standards | design refer to UL 1950 requirement | |||||||
| EMC standards | design refer to FCC 15 J class B | |||||||
| Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity | ||||||||
| 2.Error,include the setting error, line stability and load stability.(Note:5) | ||||||||
| 3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting | ||||||||
| 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. | ||||||||
| 5.Load stability test: The load is from 0% to 100%,others 60%. | ||||||||
