Specifications
1.Good quality,high performance2.Input voltage:AC110-240V 50/60Hz
3.Output:dC12V 8A
4.Approvals:CE,CCC
High efficiency,high reliability switching mode power supply, running with low noise.
Specification
SKK-S-100W | |||||||
DC output voltage | 5V | 7.5V | 12V | 15V | 24V | 27V | 48V |
Rated output current | 20A | 13.6A | 8.5A | 6.7A | 4.5A | 3.7A | 2A |
Output current range | 0~20A | 0~13.6A | 0~8.5A | 0~6.7A | 0~4.5A | 0~3.7A | 0~2.1A |
DC output power | 100W | 102W | 102W | 100.5W | 108W | 100W | 100W |
Ripple and noise | 80mVp-p | 100mVp-p | 100mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
DC voltage adjustment range | 4.5-5.5V | 6.75-8.25V | 10.8-13.2V | 13.5-16.5V | 21.6-26.4V | 24.3-29.7A | 43.2-52.8V |
Output voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
Line regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Setup, rise, hold up time | 200ms,50ms,20ms | ||||||
Input voltage range | 88~132VAC/176~264VAC 47-63Hz | ||||||
Input current | 2.4A/115V 1.2A/230V | ||||||
Efficiency | 76% | 77% | 78% | 76% | 78% | 78% | 80% |
AC Inrush current | Cold start current 30A/115VAC 6A/230VAC | ||||||
Leakage current | <1mA/240VAC | ||||||
Overload protection | 105-150%hiccup mode auto-recovery | ||||||
Over voltage protection | 115-135% rated output voltage | ||||||
Working temperature & humidity | -10°C~+50°C,20%~90%RH non-condensing | ||||||
Storage temperature & humidity | -20°C~+85°C,10%~95%RH non-condensing | ||||||
Vibration | 10~500Hz,2G 10min./1cycle, period for 60 min. each along X, Y, Z, axes | ||||||
Withstand voltage | I/P-O/P 3KVAC I/P-FG 0.5KVAC O/P-FG 0.5KVAC 1min | ||||||
Isolating resistor | I/P-O/P,I/P-FG ,O/P-FG:500VDC/100MΩ | ||||||
Safety standards | GB4943 UL60950-I EN60950 | ||||||
EMC standards | GB9254 EN55022 class A | ||||||
MTBF | 50,000hrs min. MIL-HDBK-217F (25ºC) | ||||||
Dimensions | 199x98x38mm | ||||||
Packaging | 0.56kg,36pcs/0.040CBM | ||||||
Note | |||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature | |||||||
2. Tolerance: includes set up tolerance, line regulation and load regulation | |||||||
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor | |||||||
