Compact single switching power supply 150W
Features:
·AC input voltage range selected by switch
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Year warranty
| Model | HS-150-12 | HS-150-15 | HS-150-24 | HS-150-36 | |
| Output | DC voltage | 12V | 15V | 24V | 36V |
| Voltage tolerance | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 12.5A | 10A | 6.5A | 4.2A | |
| Current range | 0~12.5A | 0~10A | 0~6.5A | 0~4.2A | |
| Rated power | 150W | 150W | 156W | 151.2W | |
| Ripple&noise(max.) | 100mvp-p | 120mvp-p | 150mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | ±10% | ±10% | ±10% | ±10% | |
| Input | Voltage range | 90~132VAC/180~264VAC(selected by switch), 254~373VDC | |||
| Frequency | 47~63Hz | ||||
| AC current(Typ.) | 3.2A/115VAC,1.6A/230VAC | ||||
| Efficiency(Typ.) | 83% | 83% | 85% | 85% | |
| Inrush current | cold start 18A/115VAC, 36A/230VAC | ||||
| Leakage current | < 3.5mA/240VAC | ||||
| Protection | Overload | above 15%~135% rated power | |||
| protection type: hiccup mode,auto-recovery after fault condition is removed | |||||
| Over voltage | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 42.6~44.2V | |
| protection type: shutoff O/P, auto-recovery after fault condition is removed | |||||
| Environment | Working temp,humidity | -10°C~+60°C, 20%~90%RH | |||
| Storagetemp,humidity | -20°C~+85°C,10%~95%RH non-condensing | ||||
| Withstand vibration | 10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axes | ||||
| Safety | Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||
| Isolated resistance | I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC | ||||
| Fitstandard | Safety standard | Fit UL1012 | |||
| EMC standard | meet EN55022, CLASS A | ||||
| Others | Dimension | 159*97*38mm (L*W*H) | |||
| Weight/packing | 0.54kg/45pcs/25kg/0.041 m³/1.45CUFT | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | |||||