Factory wholesale led driver 1000mA 150VDC
Negotiable /Unit
Min.Order:200 Units
Xiamen Evada Electronics Co., Ltd.
Factory wholesale led driver 1000mA 150VDC
Features : | |||
1.Hight input voltage (176VACup to 264VAC) | |||
2.Low ripple current design, no flicker | |||
3.Protections: Overload / Over voltage /short circuit | |||
4.Built-in active PFC function | |||
5.Cooling by free air convection | |||
6.Suitable for LED lighting and moving sign applications | |||
7.IP65/I67 design for indoor or outdoor installations | |||
9.Compliance to worldwide safety regulations for lighting | |||
10.3 years warranty |
SPECIFICATION
MODEL | CUF-150-100-FB4 | |||||||||
OUTPUT | DC VOLTAGE | 150V | ||||||||
CONSTANT CURRENT REGION | 50-150V | |||||||||
RATED CURRENT | 1000mA | |||||||||
RATED POWER | 150W | |||||||||
RIPPLE & NOISE (max.) | 1400mVp-p | |||||||||
LINE REGULATION | ±0.5% | |||||||||
LOAD REGULATION | ±1% | |||||||||
SETUP, RISE TIME | 3000/80ms at full load 220VAC /110VAC | |||||||||
INPUT | VOLTAGE RANGE | 176-264VAC | ||||||||
FREQUENCY RANGE | 47-63Hz | |||||||||
POWER FACTOR | PF≥0.99/176VAC PF≥0.97/220VAC | |||||||||
EFFICIENCY (Typ.230Vac/50Hz) | ≥92% | |||||||||
AC CURRENT | 0.980A / 176VAC 0.780A / 220VAC | |||||||||
INRUSH CURRENT(max.) | COLD START 4A/250VAC | |||||||||
LEAKAGE CURRENT | <0.75mA / 240VAC | |||||||||
PROTECTION | OVER CURRENT (Typ.) | 95 - 108% | ||||||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||||||||||
OVER VOLTAGE | 160-170V | |||||||||
Protection type : Constant voltage limiting | ||||||||||
ENVIRONMENT | WORKING TEMP. | -30 ~ +55℃ @ full load ; +70℃ @ 60% load | ||||||||
WORKING HUMIDITY | 20-95% RH non-condensing | |||||||||
STORAGE TEMP., HUMIDITY | -40~ +80℃, 10 ~95% RH | |||||||||
TEMP. COEFFICIENT | ±0.03%/℃(0-50℃) | |||||||||
VIBRATION | 10 - 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | |||||||||
SAFETY & EMC | SAFETY STANDARDS | UL1012 ; EN61347-1, EN61347-2-13 independent ; UL60950-1, TUV EN60950-1 (TBD) | ||||||||
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC | |||||||||
SOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 ℃/ 70% RH | |||||||||
EMI CONDUCTION & RADIATION | Compliance to EN55015, EN55022 (CISPR22) Class B | |||||||||
HARMONIC CURRENT | Compliance to EN61000-3-2 Class C (≥75% load) ; EN61000-3-3 | |||||||||
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A | |||||||||
OTHERS | MTBF | 30Khours. | ||||||||
DIMENSION | L166*W46*H35mm | |||||||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. | |||||||||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||||||||
3. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 4. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18. | ||||||||||
Mechanical Specification