Specifications
24v 8a switching power supplyGood heat sink ability
Small sized
OEM offered
CE ROHS
ip67 aluminum waterproof 24v 8a switching power supply for led strip light with CE ROHS
1. LPSL metal shell waterproof 24v dc switching power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7. High efficiency .
8. International AC input .
9. Built-in EMI fiter .
10.100% full load burn-in test .
LPSL The metal shell waterproof | |||
| MODEL | 12V 12W | 24V 12W | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 1A | 0.5A | |
| CURRENT RANGE | 0~1A | 0~0.5A | |
| RATED POWER | 12W | 12W | |
| RIPPLE$NOISE(max.)NOTE2 | 100mV | 150mV | |
| VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | |
| SETUP.RISE TIME | 200ms 100ms | ||
| HOLD UP TIME(Typ.) | 30ms | ||
| INPUT | VOLTAGE RANGE | 85-264VAC | |
| FREQUENCY RANGE | 47~63HZ | ||
| POWER FACTOR(Typ.) | PF>0.6/220VAC | ||
| EFFICIENCY(Typ.) | 85% | 87% | |
| AC CURRENT(Typ.) | 0.25A/230V | ||
| INRUSH CURRENT(Typ.) | COLD-START CURRENT 25A/230VAC | ||
| PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed | |
| Overlaod | 115%~135% hiccup mode,auto-recovery | ||
| Over voltage | 115%~135% hiccup mode,auto-recovery | ||
| Over temperature | ≥85%°C cut off the output, auto-recovery | ||
| ENVIRONMENT | WORKING TEMP. | -20°C~+60°C | |
| WORKING HUMIDITY | 20%~90%RH | ||
| STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH | ||
| SAFETY&EMC | SAEFTY STANDARDS | CE ROHS IP67 | |
| WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
| EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | ||
| EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | |||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation | ||
Introduction
Certificates
Packing
Logistics&Payment