240W switching power supply 5v.12v.15v.24v.36v.48v.60v.70v

 

240w Specifications sheet
model	S-240-5	S-240-7.5	S-240-12	s-240-13.5	S-240-15	S-240-24	S-240-27	S-240-48
DC Output voltage	5V	7.5V	7.5V	13.5V	15V	24V	27V	48V
Output voltage range(Note:2)	±2%	±2%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	45A	33A	20A	18A	16.5A	10A	9A	5A
Output current range	0~45A	0~33A	0~20A	0~18A	0~16.5A	0~10A	0~9A	0~5A
Wave and noise(Note:3)	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	100mVp-p	100mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±1%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	225W	240W	240W	240W	240W	240W	240W	240W
Efficiency	74%	79%	83%	83%	84%	85%	85%	86%
Adjustable range	4.5~5.6V	6~9V	10~13.2V	12~15V	13.5~18V	20~26.4V	26~32V	41~56V
AC input voltage range	90~132VAC/180~264VAC selected by switch 47~63Hz, 254~370VDC
Input current	3.6A/115V 1.8A/230V
AC Inrush current	25A/115V 50A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105 ~ 150% Type: pulsing hiccup shutdown Reset: auto recovery.
Over-voltage protection	115%~135%
Temperature coefficient	±0.03%/°C(0~50°C)
Setup, rise, hold up time	200ms, 100ms, 20ms
Vibration	10~500Hz, 2G 10min,/1 cycle. Period for 60min, Each axes
Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Working temperature and humidity	-10°C~+60°C (Refer to output derating curve), 20%~90%RH
Store temperature and humidity	-20°C~+85°C, 10%~95%RH
dimension	199X110X50mm (L*W*H)
Weight	0.82Kg
Safety standards	Design refer to UL 1950
EMC standards	Design refer to FCC PART15J class A
Note:
1. The parameter under the testing condition : 230VAC input, rated load, 25°C70% RH. Temperature.
2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5).
3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload.
5. Load stability test: The load is from 0% to 100%.
6. C3, 4, 32 must be knocked down.