1,Input parameter |
1.1 AC input voltage range: 85~264VAC |
1.2 AC input voltage frequency:47~63Hz |
1.3 AC input current: 1.6A/230VAC |
1.4 AC inrush current:Cold start, 50A at 230VAC |
1.5 Efficiency:85% |
1.6 Leakage current:<3.5mA/240VAC |
2,Output parameter |
2.1 DC output voltage:24V |
2.2 DC output rated current:2.1 |
2.3 DC output current range:0~2.1 |
2.4 DC output rated power:50W |
2.5 Ripple & Noise (max):150mVp-p (Measured at 20MHz of bandwidth by using a 12mm twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor) |
2.6 DC output voltage adjustment range (min):21.6~26.4V |
2.7 DC output voltage tolerance:23.88~24.10V |
2.8 DC output line regulation:±0.5% |
2.9 DC output load regulation:±1% |
2.10 Power setup time:100mS at full load |
2.11 Power rise time:50mS at full load |
2.12 Power hold time:20mS at full load |
2.13 Power respond time:500uS |
3,Protection |
3.1 Over load: 105~150% of rated load, shut off,AC recycle to re-start |
3.2 Short circuit: shut off AC recycle to re-start |
3.3 Over Voltage: 115~145% of rated voltage, shut off,AC recycle to re-start |
4,Working entironment |
4.1 Working temperature range: -10°C~+55°C (Refer to output load derating curve) |
4.2 Working humidity range: 0~90%RH non-condensing |
4.3 Storage temperature range: -40°C~+85°C |
4.4 Storage humidity range: 10~95%RH |
4.5 Temperature coefficient:±0.03%/°C(0~50°C) |
4.6 Vibration:10~500Hz,2G,10min/cycle,60min, each along X, Y, Z axes |
5,Safety & EMC |
5.1 Safety standards:design refer to UL60950-1,TUV EN60950-1 |
5.2 Withstand voltage:I/P-O/P:1.5KVAC,I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
5.3 Isolation resistance:I/P-O/P,I/P-FG,O/P-FG:100MΩ/500VDC |
5.4 EMC standards:design refer to EN55022,Class B |
6,Others |
6.1 MTBF:100,000 hours min, MIL-HDBK-217F(25°C) |
6.2 Dimension:159*98*42(L*W*H) |
6.3 Connection:7P/9.5mm pitch terminal block |
6.4 Weight:0.5g/pcs159*98*42 |
6.5 Packing:30s/1.0CUFT,15gs |
