Product Details

L293D module /4 DC motor drive module /2 stepper motor driver module /4WD

Product Features

Friends attention, the store driver module using LDO low linear regulator, that is, 6V into the stable output of 5V, not ordinary 7805.

Customers order a batch of green one of the remaining items, special offer loss sale. Sell delete ~

 
L293D module /4 DC motor drive module /2 stepper motor driver module /4WDL293D module /4 DC motor drive module /2 stepper motor driver module /4WDL293D module /4 DC motor drive module /2 stepper motor driver module /4WD1 product description:
The driver can directly drive four DC motors, 4WD 4 drive car chassis choice. A battery powered, up to 1A general intelligent car motor current only have enough 100-300MA to meet the requirement of control. At the same time, there are two way to enter the motor interface, can drive five two line four phase stepper motor or two road, two phase four wire stepper motor, is very suitable for precise control of demand.
The corresponding interface can be directly connected with the steering engine, infrared obstacle avoidance and other peripheral devices. At the same time a charger interface, bounce switch, hand into the charger for recharging rechargeable batteries. Very convenient!

bookFour way DC motorDrive module.STCompany original brand newL293DChip, usingSMTHigh process stability, using high quality aluminum electrolytic capacitor, so that the circuit stability. Can be directly driven by 43-16VDC motor, and provided5VOutput interface (input minimum as long as6V), you can give5VSingle chip circuit system power supply (low ripple coefficient),supportMCU ARMThree3VControl, you can easily control the speed and direction of the DC motor can also be controlled2Phase stepping motor,5Line4Phase stepping motor. Is the 4 round of the car, smart car essential weapon.

L293D module /4 DC motor drive module /2 stepper motor driver module /4WDL293D module /4 DC motor drive module /2 stepper motor driver module /4WD

 

L293D module /4 DC motor drive module /2 stepper motor driver module /4WD

L293D module /4 DC motor drive module /2 stepper motor driver module /4WD

1 of the control of the direct value of the table, the other three way.

 

 

2Product parameters:

OneDriver chip:L293DdoubleHBridge DC motor drive chip

TwoDrive part terminal power supply rangeVs: +5V~ +16V; If the board is required to take power, the scope of the power supplyVs:+6V~+16V

3.Driving part peak currentIo: 1A

FourLogical part of the operating current range: 0~36mA

SiControl signal input voltage rangeIN2 IN3 IN4 IN1IN6 IN7 IN8 IN5):
Low level: -0.3V = Vin = 1.5V
High level:2.3V = Vin = Vss

SevenEnable signal input voltage rangeEN2 EN1EN4 EN3):
Low level: -0.3 = Vin = 1.5V(control signal is not valid)
High level:2.3V = Vin = Vss(control signal effective)

EightMaimum power consumption:20W(temperatureT=75CWhen)

NineStorage temperature: -25C~ +130C

TenDrive plate size37mm*90mm

12.Other etensions: the control direction indicator light, the logic part of the board to take electrical interface.

 

 

 

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now