Specifications
60W Triple Output Switching Power SupplySwitching Power Supply
Input:110~ 220VAC Full range
Output:5V/12V/-5V,5V/12V/-12V
60W Triple Output Switching Power Supply
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 50KHz
| MODEL | T-60A | T-60B | T-60C | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| OUTPUT | DC VOLTAGE | 5V | 12V | -5V | 5V | 24V | -12V | 5V | 15V | -15V |
| RATED CURRENT | 5A | 2.5A | 0.5A | 5A | 2.5A | 0.5A | 5A | 2A | 0.5A | |
| CURRENT RANGE | 0.5 ~ 7A | 0.2 ~ 3.5A | 0 ~ 1A | 0.5 ~ 7A | 0.2 ~ 3.5A | 0 ~ 1A | 0.5 ~ 7A | 0.2 ~ 3A | 0 ~ 1A | |
| RATED POWER | 57.5W | 61W | 62.5W | |||||||
| RIPPLE & NOISE (max.) Note.2 | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | |
| VOLTAGE ADJ. RANGE | CH1: 4.75 ~ 5.5V | CH1: 4.75 ~ 5.5V | CH1: 4.75 ~ 5.5V | |||||||
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±6.0% | ±6.0% | ±2.0% | ±6.0% | ±6.0% | ±2.0% | ±6.0% | ±6.0% | |
| LINE REGULATION | ±0.5% | ±1.0% | ±0.5% | ±0.5% | ±1.0% | ±0.5% | ±0.5% | ±1.0% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±4.0% | ±1.0% | ±1.0% | ±4.0% | ±1.0% | ±1.0% | ±4.0% | ±1.0% | |
| SETUP, RISE, HOLD TIME | 300ms, 50ms, 80ms/230VAC 800ms, 50ms,10ms/115VAC at full load | |||||||||
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | ||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||||||
| EFFICIENCY (Typ.) | 72% | 72% | 72% | |||||||
| AC CURRENT | 2A/115VAC 1A/230VAC | |||||||||
| INRUSH CURRENT (max.) | COLD START 20A/115VAC 40A/230VAC | |||||||||
| LEAKAGE CURRENT | <3.5mA / 240VAC | |||||||||
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power. | ||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||||||||||
| OVER VOLTAGE | CH1: 5.75 ~ 6.75V | |||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||||||||||
| ENVIRONMENT | WORKING TEMP. | -10 ~ +60ºC (Refer to output load derating curve) | ||||||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||||||||
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |||||||||
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) | |||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||||||||
| SAFETY & EMC (Note.4) | SAFETY STANDARDS | Design refer to UL1012, UL60950, TUV EN60950 | ||||||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||||||
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |||||||||
| HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |||||||||
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A | |||||||||
| OTHERS | MTBF | 281.1K hrs min. MIL-HDBK-217F (25ºC) | ||||||||
| DIMENSION | 159*97*38mm (L*W*H) | |||||||||
| PACKING | 0.494Kg; 30pcs/16.41Kg/0.0250CMB | |||||||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||||||||
