Specifications
stainless steel wire mesh1.material:SUS 304,306,316
2.wire diameter:0.02-2.50mm
3.mesh:2-400
4.width:0.5m-2.5m
200x200 Mesh Stainless Steel Wire Mesh
Production of stainless steel wire mesh
1.stainless steel wire mesh Opening:
Stainless Steel Wire Mesh produced by Ante is classified into plain weave, twill weave, dutch weave.
2.stainless steel wire mesh Plain weave
Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
3. stainless steel wire mesh
made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
4. stainless steel wire mesh Uses
Coarse dust percolator filter mesh products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making, electronic, metallurgy etc.
5. Stainless stel wire mesh Size
Standard roll width of stainless steel wire mesh : 1m to 48"
stainless steel wire mesh | ||
Mesh/Inch | Wire Gauge SWG | Aperture mm |
40meshx40mesh | 36 | 0.44 |
50meshx50mesh | 38 | 0.36 |
60meshx60mesh | 40 | 0.30 |
80meshx80mesh | 42 | 0.21 |
100meshx100mesh | 44 | 0.17 |
120meshx120mesh | 44 | 0.13 |
150meshx150mesh | 46 | 0.108 |
160meshx160mesh | 46 | 0.097 |
180meshx180mesh | 47 | 0.09 |
200meshx200mesh | 47 | 0.077 |
250meshx250mesh | 48 | 0.061 |
270meshx270mesh | 48 | 0.058 |
300meshx300mesh | 49 | 0.054 |
325meshx325mesh | 49 | 0.051 |
350meshx350mesh | 49 | 0.042 |
400meshx400mesh | 50 | 0.0385 |
|
6.Characteristics of stainless steel wire mesh:Acid-resisting, alkali-resisting, heat-resisting and wear- resisting.
7.Packing of stainless steel wire mesh
8.Stainless steel wire mesh loading in container
We are factory of stainless steel wire mesh!
Sincerely welcome your visiting and inquiry!