On Sale High Quality 8mm Checker Plate prime st52 hot rolled steel Tear Drop 8mm Steel Plate checkered plate q235a

        1.  Material :  Hot rolled low alloy steel sheet and structural plate cut to size

       2.  Thickness: 1mm-800mm,

       3. Width: 100mm-3500mm

       4. Length:  in sheets: 100mm-13700mm

       5. Heat treatment:  normalized or tempered                                        

       6. Cut to order and cut to size, any size is available 

       7. Chemical composition and Mechanical property

Standard	Grade	C max	Mn max	Si max	P	S	Yield strength max	Tensile strength	Elongation%
JISG3101	SS400	0.22	-	0.30	0.045	0.030	245	400-500	26
GB700	Q235B	0.14-0.22	0.30-0.65	0.30	0.045	0.030	235	375-460	21-26
ASTM	A36	0.24	-	0.40	0.045	0.030	250	400-52	26
EN10025	S235JR	0.22	1.50	---	0.045	0.045	175Mpa	340-510 Mpa	17
Steel coil thicknesscan be supplied : 1.5mm- 25mm
Steel coil common width: 1250mm/1500mm/1800mm/2000mm, can produce sepcial size
Steel coil cut to steel sheet

 

Standard	Grade	C max	Mn max	Si max	P	S	Yield strength max	Tensile strength	Elongation%
JISG3101	SS400	0.22	-	0.30	0.045	0.030	245	400-500	26
ASTM	A36	0.24	-	0.40	0.045	0.030	250	400-52	26
EN10025	S235JR	0.22	1.50	---	0.045	0.045	175Mpa	340-510 Mpa	17

 

 

 

 

Packaging	when each plate weight is under 1 ton, it will be in bundle with steel strips 2-4, when each plate weight is over 1ton, it will be piece by piece.
20 feet container contains dimension	Width under 2300mm, length under 6000mm
40 feet container contains dimension	Width under 2300mm, length under 12000mm
By bulk vessel	Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo

 

 

1.How long can make delivery?
For stock products, will make shipments in 5- 7 days after receiving deposit or receiving L/C; for products need new production for common materials, usually make shipments in 15-20 days; for products need new production for special and rare materials, usually need 30-40 days to make shipment.
2. Will the Test Certificate be certified to EN10204 3.1?
For the new production products no need furthur cutting or processing, will provide the Original Mill Test Certificate certified to EN10204 3.1; for the stock products and the products need cutting or furthur processing, will issue Certificate of Quality on our Company, It will show the original mill name and the original datas.
3. Once the received products found not comply with the products the contract demands, what will you do?
Once the received products found not comply with the products the contract lists, when receiving the pictures and the official documents and data from your side, if it is proved not comply, we will compensate the loss at first time.