| material | weathering steel (corten) | ||||||
| standard | GB/T4170 | TB/T 1979 | ASTM A588 | ASTM A606 | EN10025-5 | JIS G3114 | JIS G3125 |
| grade | Q235NH Q355NH Q355GH Q460NH | 09CuPCrNi-A | Grade K | Type 4 | S235J0W S235J2W S355J0W S355J2W S355J0WP S355J2WP | SMA400 SMA490 SMA570 | SPA-H |
weathering steel also known as corten, is widely used in garden screens, bridges, containers, facades, roadblock and sculptures with its long service, low maintenance costa and artistical patina | |||||||
"Weathering" means that due to their chemical compositions, these steels exhibit increased resistance to atmospheric
corrosion compared to other steels. This is because the steel forms a protective layer on its surface under the influence
of the weather.
The corrosion-retarding effect of the protective layer is produced by the particular distribution and concentration
of alloying elements in it. The layer protecting the surface develops and regenerates continuously when subjected to
the influence of the weather. In other words, the steel is allowed to rust in order to form the 'protective' coating.
The mechanical properties of weathering steels depend on which alloy and how thick the material is.
ASTM A 242
The original A 242 alloy has a yield strength of 50,000 pounds per square inch (340,000 kPa) and ultimate tensile strength
of 70,000 psi (480,000 kPa) for light-medium rolled shapes and plates up to 0.75 inches (19 mm) thick.
It has yield strength of 46,000 psi (320,000 kPa) and ultimate strength of 67,000 psi (460,000 kPa) for medium
weight rolled shapes and plates from 0.75–1 inch (19–25 mm) thick. The thickest rolled sections and plates – from 1.5–4 in (38–102 mm) thick have yield strength of 42,000 psi (290,000 kPa) and ultimate
strength of 63,000 psi (430,000 kPa).
ASTM A 588
A 588 has a yield strength of at least 50,000 psi (340,000 kPa), and ultimate tensile strength of 70,000 psi (480,000 kPa)
for all rolled shapes and plate thicknesses up to 4 in (100 mm) thick. Plates from 4–5 in (102–127 mm) have yield
strength at least 46,000 psi (320,000 kPa) and ultimate tensile strength at least 67,000 psi (460,000 kPa), and plates from 5–8 in (127–203 mm) thick have yield strength at least 42,000 psi (290,000 kPa) and ultimate tensile strength
at least 63,000 psi (430,000 kPa).
ASTM A606-4
ASTM A606-4 is a high strength, low alloy specification with improved atmospheric corrosion properties covering hot and
cold rolled steel sheet, strip and coil. A606-4 contains additional alloying elements and provides a level of corrosion resistance
substantially better than that of carbon steels with or without copper addition. ASTM A606-4 has a 50ksi minimum yield
strength and a 70ksi minimum tensile strength. A606-4 is supplied in 2 types. Type 2 contains 0.20 minimum copper based
on cast or heat analysis (0.18 minimum Cu for product check). Type 4 contains additional alloying elements and provides a level
of corrosion resistance substantially better than that of carbon steels with or without copper addition.
,