1.Technical parameter:
Item | Specification | |
Material | Type | Galvanized coils |
Thickness | 1.5-3mm | |
Yield strength | 235Mpa | |
Roller material | Cr12 mould steel | |
Forming speed | 10-15m/min | |
Output speed | 6-8m/min | |
Speed adjusting mode | AC Frequency | |
Roller drive | Decelerating motor + Chain drive | |
Cutting mode | Hydraulic cutting | |
Cutter material | Cr12 mould steel | |
Length measurement | Encoder | |
Control mode | Mitsubishi PLC | |
Operating mode | Button + Mitsubishi Touch screen | |
Main motor power | 15KW | |
Total power | 20.5KW |
2. Components of machine:
Decoiler | 1set |
Feeding & guiding device | 1set |
Leveling device | 1 set |
Punching device | Depend on final design |
Main roll forming machine | 1set |
Hydraulic cutting system | 1set |
Controlling system | 1set |
Run out table | 1set |
3.Process flow: Decoiler ---- Feeding & Guiding----Leveling----Punching----Cutting to length----Roll forming----product to run out table
(Please refer the attached layout drawing of production line):