SUS304 stainless steel strip
Sakysteel offer a very comprehensive stainless steel strip, we can tailor made to cater the needs of various industrial and commercial segments including the automotive, petrochemical , electronic and pharmaceutical and holds contracts spring manufacturers.
A wide range of finishes can be applied to stainless steel (ss). Sakysteel stocks material with many different mill finishes.
No. 4 Finish – This finish is obtained with a ground 150-grit abrasive.
No. 43 Finish – Appliance finish
Many other finishes can be applied to stainless steel as well. Contact us for technical expertise in selecting the right one for you. Choosing the right finish can be critical for many applications.
No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish.
No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically produced by imparting a final light cold-rolled pass using [large diameter] polished rolls.
Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically produced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling during annealing.
No. 3 Finish is characterized by short, coarse, parallel polishing lines, which extend uniformly along the length of the coil.
No.4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives.
No.7 Finish has a high degree of reflectivity and a mirror-like appearance. A No. 4 finish that has been polished to 320-grit is buffed for up to 10 minutes but existing grit lines are not removed. The remnants of fine polishing lines can generally seen by an observer standing several feet from a panel.
No.8 Finish It is produced in the same manner as the No. 7 finish except that the buffing is continued for an additional five to ten minutes. In comparison to a No. 7 finish, the grit lines are much less visible, but they can be seen if the finish is examined closely. The resulting finish is mirror-like but not a perfect mirror.
If you are unsure of what finish is best for your application, we highly recommend that you contact us (Email: sales(at)sakysteel.com) . As specialists, we will ensure that your finish is the correct one.
Stainless steel strip Detail Package:
--Standard Package: Cardboard encase the ends of the coil , with core and out steel edge protection. ( No Cardboard was accepted according to customers’ instructions)
--Strips are wrapped with metal strapped and packed in strong wooden pallets.
--Special customized package is acceptable upon customers’ request
Pre-sale Service.
1.Help you to choose the products.
2.Provide samples for confirmation
3.Making the products according to
your requirement..
Sales Service.
1.A variety of certification test
2.Help you to make the method statement and the details of the production process.
After -Sales Service.
1. Our Customer service team is on
standby at all times,and if you need any
help.
2.If you have any question ,you can
contact us.
Products Name with link
91.8% Response Rate
Products Name with link
91.8% Response Rate
Products Name with link
91.8% Response Rate