Product Description
Product Name | Supplier mild S35C 35# aisi 1035 carbon steel round bar price |
Standard | ASTM, AISI, GB, JIS, EN, DIN |
Specification | Diameter: 10~300mm Length: 3000~6000mm |
Type | Round/Square/Hexagonal/Angle/Flat Bar |
Nearly Brand | GB 35#, JIS S35C, DIN C35, BS 060A35, NF XC38TS |
Quality | MTC |
Package | Standard seaworthy package or Customized. |
Delivery Time | 5-30 working days after receiving the down payment. |
*Payment Term | T/T, Trade assurance, Western Union, L/C, etc By T/T, 30% down payment, 70% balance before shipment. |
1035 steel high quality carbon structural steel (GB/ t699-2015) has good plasticity and appropriate strength, good process performance, good welding performance, mostly used in normalizing state and tempered state.
Widely used in manufacturing various forgings and hot press pieces, cold drawn and forged steel, seamless steel pipe, mechanical parts, such as crankshaft, shaft, shaft pin, lever, connecting rod, beam, sleeve, wheel ring, washer and screw, nut, motorcycle frame, etc.
Widely used in manufacturing various forgings and hot press pieces, cold drawn and forged steel, seamless steel pipe, mechanical parts, such as crankshaft, shaft, shaft pin, lever, connecting rod, beam, sleeve, wheel ring, washer and screw, nut, motorcycle frame, etc.
Density | 7.85g/cm3 |
Tensile strength σb (MPa) | ≥530 |
Elongation δ5 (%) | ≥20 |
Yield strength σs (MPa) | ≥315 |
Hardness HB | ≤197 |
Chemcial Composition (%wt) | ||||||||||||||
Grade | Ni | Mn | Cr | Cu | Si | C | S | |||||||
15# | ≤0.25 | 0.35~0.65 | ≤0.25 | ≤0.25 | 0.17~0.37 | 0.12~0.19 | ≤0.035 | |||||||
25# | ≤0.30 | 0.50~0.80 | ≤0.25 | ≤0.25 | 0.17~0.37 | 0.22~0.29 | ≤0.035 | |||||||
35# | ≤0.30 | 0.50~0.80 | ≤0.25 | ≤0.25 | 0.17~0.37 | 0.32~0.39 | ≤0.035 | |||||||
45# | ≤0.30 | 0.50~0.80 | ≤0.25 | ≤0.25 | 0.17~0.37 | 0.42~0.50 | ≤0.035 | |||||||
50# | ≤0.30 | 0.50~0.80 | ≤0.15 | ≤0.25 | 0.17~0.37 | 0.47~0.55 | ≤0.035 |
*Storage: Pay attention to moisture, dust, oil, lubricating oil, as well as surface rust, or poor welding corrosion resistance.When water is immersed between the film and the steel substrate, the corrosion rate is faster than that without the film.Warehouse storage should be placed in a clean, dry and easy to open the air, to maintain the original packaging state, the stainless steel film should avoid direct light, film should be periodic inspection, if the film deterioration (film life of 6 months) should be replaced immediately, if the packing material when pad paper, in order to prevent surface corrosion should be
immediately removed pad paper.
immediately removed pad paper.
Our Service
Custom service | ||
Metal element | Can add a certain metal element, according to customer requirements for metal element content adjustment | |
Specification | Regular size, large size, small size | |
Surface | No.1, No.2D, No.2B, No.3, No.4, #320, HLNo.4, BA, etc | |
Hardness | Super soft, soft, semi-soft, low hardness, hard | |
Technology | Hot rolling, cold drawing, normalizing, annealing, high temperature tempering, solid solution treatment | |
Edge state | Yes or no trimming |
After-sales service
Within 7 days after the customer receives the goods, can return or replace the goods and claim for compensation if there are quality problems. And the freight shall be borne by our company.
*Returns and exchanges are not acceptable undder the following circumstances:
1. Non-pruduct quality problems.
2. The product purchased cannot be used due to the customer's fault (please inform the purpose and other details of the product when you inquiring).
3. Product quality problems caused by natural disasters and other force majeure factors in transit.
4. Due to the customer transport, storage and other improper resulting in product quality problems.
*Returns and exchanges are not acceptable undder the following circumstances:
1. Non-pruduct quality problems.
2. The product purchased cannot be used due to the customer's fault (please inform the purpose and other details of the product when you inquiring).
3. Product quality problems caused by natural disasters and other force majeure factors in transit.
4. Due to the customer transport, storage and other improper resulting in product quality problems.
Packing&Shipping
Company Introduction
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.