SANY brand port stacker SRSC45H8A new
Table 2-1 Technical Parameters of Container reach stacker
Series | SRSC45H8A | Crane spreader | Type | ELME817 or SDJ450 | ||||
Overall machine | Overall length | 11230mm | Rotary angle | +105°/-195 ° | ||||
Overall width | 4130mm | Side shift distance | +800/-800 mm | |||||
Overall height | 4780mm | Max. bearing | 45000 Kg | |||||
Overall quality | 71000kg | Applicable range | 20/40international standard container | |||||
Bearing capacity | The first row | Load center:1965mm 1-4 layer:45000kg 5 layer :43000 kg | Hoisting object | 20/40 international standard container | ||||
The second row | Load center :3815mm 1-4 layer :31000 kg 5 layer :30000 kg | Out rigger | Max. lifting height | 15100mm | ||||
Tilting angle | 0-60° | |||||||
The third row | Load center :6315mm 1-3 layer :15000 kg 4 layer :14000 kg | Stroke | 7070mm | |||||
Max. lifting speed (no-load/load) | 420/250 mm/s | |||||||
Engine | Type | TWD1240VE | Max. traveling speed (no-load/load) | 25/21 km/h | ||||
Model | Series six cylinder , 4-stroke, central water cooled, turbocharged, electrical spray | Max. falling speed (no-load/load) | 360/360 mm/s | |||||
Gradeability (no-load/load) | 39/32 % | |||||||
Controlling mode | EDC III full electric control system of CAN general line | Max. traction force | 360 kN | |||||
Min. turning radius | 8000 mm | |||||||
Rated power | 256 kw/2100 r/min | Steering mode | Hydraulic servo-assist steering | |||||
Rated torque | 1751 Nm/1200 r/min | Wheel base | 6000mm | |||||
Tail gas emission standard | Euro II | Ground clearance of machine | 350mm | |||||
Average oil consumption ratio | 197g/kwh | Traveling speed | front/rear (F/R) | The first gear | 3.6 km/h | |||
Transmission | Type | CLARK 15.5HR36432 | The second gear | 8.6 km/h | ||||
Gear mode | automatic/manual | The third gear | 14.8 km/h | |||||
Gear | 4 gears for forward and backward | The fourth gear | 25 km/h | |||||
| ||||||||
