spherical roller bearing 22312 bearing 22312 22314 22313
Bore diameter: | 60 mm | Maximum rpm: |
5300 RPM |
|
Outside diameter: | 130 mm | Operating temperature range: |
Maximum of +390 °F |
|
Overall width: | 46 mm | Cage material: |
Steel |
|
Bore type: |
Straight |
Bearing material: |
Steel |
|
Outer ring type: |
Not Split |
Cage type: |
Inner Ring Guided |
|
Internal clearance: |
C3 |
Precision rating: |
Not Rated |
|
Closure type: |
Open |
Finish/coating: |
Uncoated |
|
Lubrication hole type: |
Lubrication Groove & Hole |
Outer ring width: |
46 mm |
|
Dynamic load capacity: |
310 kN |
Fillet radius: |
2 mm |
|
Static load capacity: |
335 kN |
Series: |
223 |
Spherical Roller Bearings
Spherical Roller Bearings offer an attractive combination of design features, which make them irreplaceable in many demanding applications.
Self-aligning - allows misalignment between shaft and housing without increase of friction and without reduction of bearing life
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design
Protection against contamination sealed spherical roller bearings are especially suited for bearing positions where, because of limited space or for cost reasons, effective external seals cannot be provided
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low