Non-pressurized solar water heaters working principle
This type solar water heater uses the all-glass evacuated solar collector tubes as the heat-absorb element. The high vacuum degree of the clearance between the outer and inner tube can reduce the heat emission which caused by convection and conduction to a very low level. All-glass evacuated tube transfers sun energy into heat energy by the high absorption rate and low emittance rate of layer films. Depend on the different density between the hot water and the cold water, a cycle can be created in the tube which hot water ascending and cold water descending status. Keeping natural circulation like this, the water in the tank will be heated.
Advantages
1. Can be operated completely automatic if connect with intelligent controller.
2. Simple structure, easy installation, can be installed both on flat and inclined roof, and can be used with an auxiliary electric booster as to provide hot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 50~ 60 mm .
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance.
6. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B stainless steel plate; the silica gel ring sealing has a long life against the erosion and it is not harmful to health.
Front
Water tank free logo print
Side
High quality solar vacuum tubes
Back
Frame angle base on local latitude
Inner tank Material
SUS304-2B Or SUS316L/316 stainless steel
Thickness 0.3/0.4/0.5 mm
Outer tank Material
Painted steel with many color in option
Or Stainless steel SUS304/SUS201
Solar Vacuum Tube
Coating: Single target or Three targets
Size: 47*1800 mm, 58*1800 mm, 58*2100 mm, etc