High Efficiency Color Steel Heat Pipe Vacuum Tube Integrated Pressurized Solar Water Heater
Technical Data of Integrated Pressurized Solar Hot Water Heater/Solar System
Heat Pipe Solar Vacuum Tube | Size (mm) | Φ58*1800/ Φ47*1500 | |||||
Tube (PCS) | 10 / 12 / 15 / 18 / 20 / 24 / 30 / 36 | ||||||
Glass tube | Vacuum Tube with three-target coating Cu/SS-ALN(H)/SS-ALN(L)/ALN | ||||||
Heat Pipe | Red copper pipe evacuated & filled with heat-transfer liquid | ||||||
Heat conduction | Shaped aluminum wrapping tightly contacted with heat pipe tube | ||||||
Pressure Solar Water Storage Tank | Capacity | 90L ~ 500L for hot water storage tank | |||||
Inner tank | Food-grade stainless steel SUS304-2B / SUS316 / enamel | ||||||
Pipe socket | Copper pipe sockets pre-installed in storage tank for heat exchange | ||||||
Insulation | High-density polyurethane foam with 80~90 hours heat preservation | ||||||
Tank shell | stainless steel | ||||||
Solar System Bracket | Shaped strong galvanized steel adaptable to flat and slope roof | ||||||
Accessories | T/P valve, Check valve, Dustproof seals, Adjustable tube holder, Stainless screws | ||||||
Auxiliary Equipments | Electrical Heater, Intelligent Controller, Magnesium anode, Pipe&fittings | ||||||
Tilt Angle | 25 ~ 50° | ||||||
Anti-freezing | (-) 30°C | ||||||
Hail Resistance | Φ25mm diameter | ||||||
Working Pressure | 6.0 bar | ||||||
Model Number | Heat Pipe Vacuum Tube | Tank Liter | Container Loading Qty /sets | ||||
Size /mm | Qty /PCS | 20GP | 40GP | 40HQ | |||
SN-PCS10 | Φ58*1800 | 10 | 80 | 72 | 144 | 174 | |
SN-PCS12 | 12 | 100 | 61 | 122 | 148 | ||
SN-PCS15 | 15 | 130 | 50 | 100 | 121 | ||
SN-PCS18 | 18 | 150 | 41 | 82 | 100 | ||
SN-PCS20 | 20 | 170 | 37 | 75 | 91 | ||
SN-PCS24 | 24 | 200 | 33 | 65 | 79 | ||
SN-PCS30 | 30 | 250 | 25 | 51 | 62 | ||
SN-PCS36 | 36 | 300 | 22 | 44 | 54 | ||
1 Working Principle of Integrated Solar Water Heater with Heat Pipe Tube
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat
energy and transfers heat to the heat pipes by aluminum fins, the liquid in the heat pipe changes
into vapour which rises to the condenser. The heat then passes through the heat exchanger and
the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat
transfer liquid (antifreezing liquid or water ) via a copper pipe. This transference of heat into the
liquid creates a continuous circulation as long as the collector is heated by the sun
2 Features of Integrated Pressurized Solar System
1.It can withstand pressure of tap water when it works
2.There is no need to wait
3.Completely automatic operation
4.Drinking water quality to promote life quality
5.Temperature preservation can last for 80hours
6.Without volatile tubes
7.Without encrusting, long usage life
3 Advantages of Pressurized Solar Hot Water Heater
Comparing with Non-pressure and Pre-heat solar water heater
1. Heat pipe tubes for in-direct solar water heating, more safe, fast, anti-freezing
2. No system drainage when one or several tubes are broken
3. High pressure tank connecting with city water directly to get high pressure hot water
4. No need to install on roof top to get hydraulic water pressure
5. Less heat loss with safety valve closed tank
6. Almost maintenance freely system
Comparing with split heat pipe solar water heater
1. More lower cost
2. More simple structure and installation
Comparing with pressure flat panel solar water heater
1. Higher efficiency collector, much lower heat loss
2. Super anti-freezing performance for cold weather
3. No system drainage when one or several tubes are broken
4. Convenience in parts carrying and installation
4 Service of Haining Sanneng Solar Water Heater Co., Ltd.
Fast response: Your inquiry will be replied within 24 hours via e-mail or online messenger;
Technical support: You have more than 10 years experience from SANENG SOLAR for product suggestion, installation guidance, market analysis, etc.
OEM & ODM: We welcome OEM & ODM requirements for solar collector, storage tank,
installation frame, and even for some outsourcing equipments;
Sample checking: In spite of quality control in production, samples will be selected and
installed to check prior to delivery
Minimum order quantity: We offer sample sample manufacturing for customers to check
SANENG quality and service;
Shipping service: SANENG company offers to arrange goods shipment to abroad ocean port
or inland site, and if necessary to make goods insurance, customs clearance, etc;
Import certificates: SANENG company offers to make Certificate Origin CO, FORM A, FORM E, FORM F, customs certification, etc.
5 Remarks
1.Lead-time: 7-15 working days after receiving payment.
2.Payment Term: T/T, L/C, Western Union.
3. Warranty: 5 Years for the full system, 15 Years for the vacuum tube, and 1 year for accessories
4. Trade Term: FOB, CFR and CIF.
5. Contact: Ms. eva he Mobile: (00)86-13511390503 Skype: eva201423