Separate Pressurized Solar Water Heater with High Quality

Specifications

Water tank:

1) Inner tank: SUS 304-2B stainless steel, 150L-200L 1.2mm thickness, 300L-400L 1.5mm thickness

2) Insulation: 50mm polyurethane foam.

3) Outer tank: 0.5mm thickness galvanized steel material

4) P/T relief valve, electrical heater element with terminator

5) Heat exchanger: 20m long, 12mm diameter, 1mm thickness copper pipe

Vacuum tube:

Trivalent element evacuated tube (high borosilicate glass)

Work station:

1. Expansion tank:5L volume,-10°C-99°C operation temperature,    1Mpa maximum operation pressure (Italy)

2. Circulation pump: WILO RS15/6, three phases, 220v/50Hz (German)

3. Probe: Pressure &Temperature Probe &Check valve

4. Temperature sensor: Three temperature sensor & flow meter (Switzerland)

5. Digital display: Temperature adjustor &Timing water supply

Feature:

1) Pipeline is made of all red copper and conducted by heat transfer medium liquid.

2) Water does not flow in the vacuum tubes and is operated when confined.

3) The crust uses aluminum alloy mould material of high strength with airflow design.

4) It is finished in good style.

5) Tank is equipped with electric water heater setting, automatic temperature controller.

6) With increased anode magnesium bar stick to prevent furring.

7)The insulating layer uses polyurethane bulk bubble.

8) It successfully carries out installation of separation according to fabricating yard.