1. Simple Introduction Of 25HP Normal Specification solar water pump irrigation system for agriculture JNP18K5H In Multan, Pakistan
This 25HP system consists of 4 parts: solar PV modules, PV pump inverter,
Three phase AC pump and water storage device. The pump inverter converts DC power
produced by PV module to AC power required by the pump. A microprocessor continuously
monitors available energy levels and adjust pump speed, matching energy required to
energy available. This enables the system to operate under varying solar insolation levels,
and provide water throughout the day and through different seasons. The inverter untilize
a high efficiency MPPT algorithm to maximize power harvested from PV module
2. Solar pump system Application
3.solar pump system feature
4.Pump Specifications
We choose pump according to project head and water requirement.
5. Solar pumping inverter
6. Solar panels
Polycrystalline 250W (Vmp=30.6V,Isc=8A) solar panels are used in system configuration
Nominal power watt Pmax (Wp) | 250W |
Max. power voltage (Vmp) | 30.3V |
Max. power current (Imp) | 8.17A |
Open circuit voltage (Voc) | 36.3V |
Short circuit current (Isc) | 8.71A |
Power tolerance | 0~+3% |
Compare with Diesel pump
Extra service:
Design software to make the system configuration automatically.
Monitoring system can realize remote control for inverters.
Our company
We Hefei JNTECH New Energy Co., ltd are Solar Pump Inverter manufacturer, with our own R&D center, production line, pre- & after- sales service from China which founded in 2006. Meanwhile, we are also contributing to provide complete solar pumping system which consists of solar panels, mounting structure, pump and other auxiliaries.
We can do the power range from 1.1kw until 55kw, 110kw is our next target.