PV Solar Pile Ground Rack Mounting
Grace solar pile ground system is applied for large commercial and utility PV systems on non-sandy ground,suitable for both framed and framelss module installation.
Piled into the ground 1 to 2m, with high pre-assembly aluminum beam structure,B-rail with clamps.
Material: anodized aluminum, hot-dip galvanized steel
With AS/NZS 1170 and TUV certifications
Install site: ground non sandy
Install angle: 0 to 30°
Maximum building height: 10 to 20m
Wind load: 130mph (60m/s)
Snow load: 30fps (1.4kN/m2)
Anti-corrosive
Anodized or hot dip galvanized
Color: natural or customized
Adjustability: post height deviation 10mm
post angle deviation:2degree
post verticality deviation:2 degree
post driving depth:1000-2000mm
|
Material |
Aluminum AL6005-T5 |
|
Standard |
AS/NZS 1170, TUV |
|
Install Site |
Roof or Ground |
|
Install Angle |
0-60 degree |
|
Max Building Height |
20 m |
|
Wind load |
130mph(60m/s) |
|
Snow Load |
30psf(1.4kN/m2) |
|
Anticorrosive |
Anodized or hot galvanized |
|
Color |
Natural or Customized |
|
Warranty |
10 years |
|
Duration |
More than 20 years |
1. Flexibility: roof mount, pole mount, ground mount, ballasted mount, etc both for on grid and off-grid systems, for framed and frameless panels
2. Easy Installation: All kits are highly assembled in factory. The tilt in module can be located in any location of rails.
3. MOQ: Sample orders are allowed
4. Delivery Time: 3-15 days when orders are confirmed
You are welcome to send us an inquiry for more information. Our products can meet requirement of any install solutions. Customized designs are accepted.
