Solar cell tester
Applicaitions:
Electric performance test and on the file for Mono-Si or Poly-Si solar cells.
Equipment Features:
- Pneumatic bumper pin-contact, Pin-contact, on the sunny side and planer contact on the rear side;
- 4-strand testing mode and 14-byte 4-channel high-speed synchronous acquisition;
- 10 preferences on display and testing data illustration in terms of sheets and curves;
- Irradiance and temperature self compensating;
- Vocal test reporting and screen counter for flashes;
- High reliable, high precision, high efficiency;
- 24/7 tools uptime and 100,000 flashes for life-time of Xenon lamp
Technical Specification:
Items | GSCT-B |
Lamp Spectrum | IEC60904-9 and JISC8933 |
Light intensity |
100mW/cm²(20~120mW/cm² continuous adjustable ) |
Uniformity of Irradiation |
≤3% |
Instability of Irradiation |
≤2% |
Consistency of Testing |
≤1% |
Pulse Width of Single Flash |
10 ms |
Effective Testing Area/Watts |
200mm×200mm 0.1W~5W |
Measuring voltage |
0~0.8V (resolution 1mV) |
Measuring current | 0~20A (resolution 1mA) |
Test Parameters |
Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs,Rsh,Ir |
Data acquisition |
4-bit 4-channel high-speed synchronous acquisition card |
Options:
Special design for 2 Bus-bar, 3 Bus-bar, or other cell metallization forms orientated as options.