CM5024Z-40A 50A
Sample Can be bought from Our Online Store:
http://www.aliexpress.com/store/341515
CM series controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet you’re your various application requirements.
CM series controller has following features:
1.Image of LCD graphic symbol
2.Simple button operation
3.Automatic Identification System Voltage level
4.Intelligent PWM charge mode
5.Automatic Temperature Compensation
6.Adjustable charge-discharge control parameters
7.Settable Operating mode of Load
8.Overload, Short Circuit Protection
9.Remote monitoring and control function (custom)
10.Battery reverse-discharge protection
11.Battery Low Voltage Disconnection (LVD)
12.Battery reverse connection protection
13.Accumulated function of charge and discharge Ampere hours
LCD Display Shows the following Parameters:
1.Battery Voltage
2.Load on/off control
3.Environment Temperature
4.Solar Panel charging current
5.Load discharging current
6.Accumulated charging power (Ah) by solar panel And back to zero
7.Accumulated discharging power (Ah) by Load and Back to zero
You can Set the following Parameters:
1.High Voltage Disconnection
2.Low Voltage Reconnection
3.Low Voltage Disconnection Protection
4.Load Working Mode
Model Data | CM5024Z | CM5048 | Model Data | CM5024Z | CM5048 |
Rated current | 40A,50A | 40A, 50A | Installation cable area | >3# AWG (<25mm2) | |
Rated voltage | 12V/24V | 48V | Operating temperature | -20℃~50℃ | |
Maximum voltage of solar panel | ≤50V | ≤100V | Storage temperature | -30℃~70℃ | |
Float voltage | 13.7V/27.4V | 54.8V | Humidity Requirement | ≤90%, No Condensation | |
Low Voltage Disconnection | 10.7V/21.4V | 42.8V | Size | 130mm×188mm×62mm | |
Low Voltage Reconnection | 12.6V/25.2V | 50.4V | Mounting hole spacing | 98 mm×178 mm --Φ5 | |
No load loss | <30mA | Weight | 590g | ||
Loop voltage drop | ≤200mV |
|
| ||
Charging mode | PWM Mode |
|
| ||
Temperature compensation | -4mV/Cell/℃ |
|
| ||
Notes | Model suffix Z represent automatic identify system voltage level, T represent controller with remote monitoring. | ||||