Flanged Slewing Ring Bearing outer gear VSA250855N 997X755X80 MM
VSA 250855 N Slewing rings are sealed on both sides, lubricated with a high quality grease, can be re lubricated via lubrication nipples and are particularly easy to fit. The bearing rings are supplied without gear teeth or, in order to achieve simple drive solutions, are available with external or outer gear teeth.
slewing rings are designed as:four point contact bearings
these slewing rings without preload are robust and proven under very demanding operation; they place only slight demands on the flatness and perpe
dicularity of the adjacent construction.They are suitable for applications with low requirements for accuracy and rigidity of the bearing arrangement, for example in simple metalworking machines, wind power equipment and construction machinery The slewing bearing VSA 250855 N Belongs to four point contact ball bearing with external teeth,It consist on inner ring outer ring and ball parts. The slewing bearing VAS250855N Belongs to four point contact ball bearing with external teeth,It consist on inner ring outer ring and ball parts. The outer diameter:997mm, The inner diameter:755mm The height:80mm
Bearing description:four point contact ball slewing bearing
Bearing factory model number: VSA 250855 N
China Bearing old type: VSA250855N
Precision grade:P5 P6 grade
The bearing application:Aerial Hydraulic Platforms • Antennas • Arc Furnaces • Band Conveyor • Blast Furnace Gas Cover • Casting Equipment
Bearing boundary Dimension: 997X755X80 MM
ID(inner diameter)/:755 MM
OD(outer diameter):997 MM
Width/Height/thickness:80 MM
Weight:145 KGS
The seaport name:Shanghai or Tianjin or qingdao seaport
Outer Ring and Inner Ring heat treatment:HRC55-62
Bearing boundary inch size:39.25 x29.72x3.14
Bearing outer diameter inch: 39.25 inch size
Bearing inner diameter inch size:29.72 inch size
Bearing height inch:3.14 inch size
Outer Ring material:42CrMo, 50Mn
Inner Ring material:42CrMo, 50Mn
Lubrication:Oil or Grease oil hole and oil groove in the outer ring
Basic dynamic load rating, Radial Cr:315 KN
Basic static load rating, Radial Cor:1150 KN
Rolling LYC ball
Teeth data
Do 981mm
M 9
Teeth number 109
Quality standard:GB307 Rolling bearing technical requirement
Service:We can provide technology consultation and products selection for customers in many ways.
The bearing working speed:800rpm
Trademark:JHB or OEM
HS code:8482100090
Origin:LuoYang, China
Service Technology communicate with engineer, and if you need the assembly drawing,we can send to you
