Delivery Time:7-15 days after payment
Certification:ISO9001， CE
LG series stable pressure screw electrical air compressor Large displacement
Quick Detail:
1. Model: LG-8.7 /10
2 . Air delivery: 8.7m³/min / 305cfm
3. Working pressure:1.0 mpa/10bar/145psi
4. Connector: G1 1/2
5. Dimention: 1620*1230*1670mm
6. weight:1600kg
We may provide all kinds of invert screw air compressor,the power from 5.5kw to 280kw,the air delivery from 0.6m³/min to 72m³/min,the working pressure from 0.5mpa to 1.3mpa,and with water cooling ,air cooling,belt drive or direct connecting.
2. screw air compressor main spare parts configuration:
|
screw air compressor main spare parts configuration: |
||
|
Item |
Parts |
Brand |
|
1 |
Air end |
SKK(USA) |
|
2 |
Intake Valve |
Hoerbiger (Austria),Hongxing |
|
3 |
Solenoid Valve |
CEME (Italy),Hongxing |
|
4 |
Temperature sensor |
kaishan original |
|
5 |
Pressure sensor |
Huba original (from Switzerland) |
|
6 |
Motor |
Dongguan/Qingjiang Motor |
|
7 |
Coupling |
Germany KTR or kaishan |
|
8 |
Thermostat Valve |
Italy VMC |
|
9 |
PLC |
Schneider Electric(France),Siemens,Plot |
|
10 |
Minimal Pressure Valve |
Hoerbiger (Austria)/kaishan |
|
11 |
Air filter element |
Germany MANN /kaishan |
|
12 |
Oil filter element |
Germany MANN /kaishan |
|
13 |
Oil and gas separator element |
Germany MANN/kaishan |
|
14 |
Bearing |
Sweden SKF (Life 60000 hours) |
Remarkable Air end:Germany original-builing GHH-RAND air end adopts the third-generator dissymmetrical gear shape.The main rotor is five gears and the vice rotor is six gears.As the differences between them is small,the loss of circumfluence is small which increases the cubage efficiency by close to 20% and save the electric currency by about 25% comapared to normal screw air compressor.The rotor is dissymmetrical shape ,supported by ball bearing and rod bead bearing and operating at a low speed so it can lower the mairtanance cost and provide the air end with a longer service life
Gas Intake valve:Controlledby computer ,the stable and dependable air inlet control valve can make the air displacement and power consumption of the motor chang along with the air consumption,so as to save energy and electrity ,and reduce the operating cost
Oil and air separator:Screw shaped design of oil and gas separator is easy to uninstall and change. Separator core can separate the left oil in the process of compressing air. After separating ,the left oil will be about 1-2 ppm. this will increase the cleanness of the compressed air and lower the pollution to the compressed air and lower the pollution to the compressed air and equipment
Cooling system:The designed super large cool area ensures it working normally at high temperature and hot environment. Good heat transfer performance, little flow resistance and low request for water quality. It is convenient to clean and need no special cleaning fluid.
Motor:Famous brand motor with F class isolation and IP54 protecting class. It uses imported SKF durable bearing and can be operated all day long
Temperature Controller Valve:Designed specially for the high environment temperature and high air humidity, upon cold start up, thermal valve enables the system to reach the best working temperature as soon as possible, and maintains constant temperature and viscosity of lubricant to prevent condensing of evaporated gas and emulsification of the lubricant, which prolongs the service life of the lubricant, rotor of the main machine,bearing and other parts
3. Description:
♦Fully se
