Product Details

Acrel AHKC-BS uninterruptible power supplies AC,DC current signals measuring hall effect signal isolator transmitter

Brand Name Acrel
Place of Origin Jiangsu, China
Model Number AHKC-BS
Usage Signal isolation conversion
Theory hall effect
Output 5V/4V

Product Features

AHKC-BS Hall Sensor
Measurement
- AC, DC, pulse and other complex current

Appearance
- Small package size
- Low power consumption
- Extended measuring range
Input
0-50-500A
Output
5V/4V


Power supply

±15V


Accuracy

1 class


Attention: 1. When the hall sensor is used, in order to obtain better dynamic characteristics and sensitivity, attention must be paid to the coupling between the primary side coil and the secondary side coil. It is recommended to use a single wire and the wire completely fills the hall sensor module wire hole;
2. When the hall sensor is used, the best measurement accuracy can be obtained under the rated input current value. When the measured current is far lower than the rated current To obtain the best accuracy, multiple turns can be used for the primary side, i.e. IPNP = rated ampere turns. In addition, the temperature of the primary side feeder shall not exceed 80 ℃;
3. The auxiliary power supply of Hall current sensor shall not exceed ± 20% of the calibrated value when it works normally; 4. Hall current sensor shall not fall from a high place (≥ 1m) during installation and use; 5. It is unable to adjust the zero point and full degree adjustment potentiometer; 6. Auxiliary power supply needs to be configured by itself; 7. The positive and negative poles of the power supply cannot be reversed.

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now