Hall effect current transducer model: RCS06A-300
Profile:
Open loop Hall effect current transducer RCS06A-300 is for the real-time precision measurement:
DC, AC, pulsed and irregular wave currents with galvanic isolation between the primary circuit and the secondary circuit.
Performance parameter
Electric parameters | Features 1. Open loop 2.According to UL 94-V0 requirements 3.RoHS and CE certificated
Superiorities 1.Excellent accuracy, very good linearity 2.Low thermal drift 3.Wide bandwidth 4.Fast response 5.High immunity to external interference 6.Good overload capability 7.Low inductance
Applications 1. VF speed regulating device 2. Converter / Inverter 3. UPS 4. SMPS 5. Electric locomotive / vehicle 6. Grid monitoring 7. Industry measuring circuit 8. Motor drive | |||||
Ipn | Nominal RMS current | 300A | ||||
Ip | Measuring range | 1.5* Ipn | ||||
Vsn | Output voltage @ Ipn | 5V | ||||
Rm | Load resistance Rmax | ≥10kΩ | ||||
Vc | Supply voltage | ±12V~±15V | ||||
Ic | Current consumption | 15mA+output current | ||||
Vd | Withstand voltage | 2.5kV/50Hz/min | ||||
Dynamic parameters | ||||||
X | Accuracy @Ta=25°C | ±1% FS | ||||
εL | Linearity @Ta=25°C | ±0.5% FS | ||||
VO | Offset voltage @Ta=25°C | ±20mV | ||||
VOT | Thermal drift | ≤±0.5mV/°C | ||||
Tr | Response time | ≤1us | ||||
BW | Bandwidth | DC~100kHz | ||||
di/dt | Following accuracy | ≥100A/us | ||||
General parameters | ||||||
Ta | Operating temperature | -25~+85°C | ||||
Ts | Storage temperature | -40~+90°C | ||||
W | Weight | 75g±10% | ||||
Standards | EN50178:1998 | |||||
Dimension
Connection
Notices
1. Please connect according to the dimension drawing in which defining the current flowing direction and the function of the PIN.
2.The temperature of the primary busbar can’t be over 100°C
3.We can also develop and manufacture transducers depending on customers’ requirements. Welcome to communicate with us when you are in this kind of demand.
Applied in electricity and power supply
Brand introduction