4~20mA Output High Accuracy Digital Magnetic Compass, 3D Compass Module, Compass Sensor Fast Delivery
Description:
HCM508B is a high accuracy 3D compass single board sealed in aluminum enclosure with IP67 waterproof grade, more suitable for drilling measurement. it uses advanced hard iron and soft iron calibration algorithm, it can still provide the high precision heading information in the roll angle 360 ° to any tools surface .it has the characteristics of small and low power consumption, and more suited to today's miniaturization sensitive measurement system.
HCM500B integrated patented three -axis fluxgate technology, real-time solver heading data through CPU , and use a three-axis accelerometer to proceed with heading compensation for a wide range tilt angle, belongs to the high-performance, high stability military grade products , HCM500B with small size, low power consumption, widely used in the antenna securely, vehicle and system integration etc. many fields .
Features:
- Heading accuracy: 0.3°~0.5°
- Roll angle measuring range :±180°
- Tilt angle resolution: 0.1°
- Tilt angle accuracy: 0.2°
- With hard magnetic ,soft magnetic and angle compensation
- Size: L:125×W:22×H:24 mm
- Standard RS232/RS485/TTL output interface
- Wide temperature : -40℃~+85℃
Application:
- Satellite antenna search satellite
- Marine navigation surveying and mapping
- GPS integrated navigation
- Antenna servo control
- Gun emission system
- Infrared imager
- Laser range finder
- Map for plotter
- ROV underwater robot navigation
- Oceanography measurement instruments
- Special occasion robot
- Unmanned aircraft
Product Show
Technical Data
Compass heading parameter | The best heading accuracy | 0.3° tilt <10° |
1.0° tilt <180° | ||
Resolution | 0.1° | |
Compass tilt parameter | Pitch accuracy | 0.1°<15°(Measuring range) |
0.1°<30°(Measuring range) | ||
0.1°<60°(Measuring range) | ||
0.2°<90°(Measuring range) | ||
Pitch tilt range | ±85° | |
Roll accuracy | 0.1°<15°(Measuring range) | |
0.1°<30°(Measuring range) | ||
0.1°<60°(Measuring range) | ||
0.2°<180°(Measuring range) | ||
Roll tilt range | ±180° | |
Resolution | 0.1° | |
Calibration | Hard iron calibration | Yes |
Soft iron calibration | Yes | |
Magnetic field interference calibration method | 24 points(3D calibration) | |
Physical features | Dimension | L:125×W:22×H:24 mm |
Weight | 20g | |
RS-232/RS485/TTL interface connector | 5PIN connector | |
Interface features | Start delay | <50MS |
Maximum output rate | 20Hz/s | |
Communication rate | 2400 to19200baud | |
Output format | Binary high performance protocol | |
Power | Power supply | (Default)DC+5V |
(Customized)DC9~36V | ||
Current(Maximum) | 20mA | |
Ideal mode | 18mA | |
Sleep Mode | TBD | |
Enviroment | Operating range | -40℃~+85℃ |
Storage temperature | -40℃~+100℃ | |
Resistance shock performance | 2500g | |
Electromagnetic compatibility | According to EN61000 and GBT17626 | |
MTBF | ≥40000 hours/times | |
Insulation resistance | ≥100M
| |
Shock resistance | 100g@11ms,3Times/Axis(half sinusoid) | |
Anti-vibration | 10grms,10~1000Hz | |
Weight | 80g(without cable) | |
Ordering information
Measuring Directions&Fix
The installation must guarantee the product bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to the following scheme.
Dimension
Production installation notes :
Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface", "line"::1)The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error. See Figure Pic.AB
2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible. See Figure Pic.CD
Software Interface
Electrical Connection
Shenzhen RION, as a positon sensor manufacturer and solution expert, attaches much importance to products reseach and develop which spend over 20% of annual profit. We have the most R&D personnel and best technology comparing with our peer to raise our up on the high level of sensor field. And we orientate ourself to market tightly and engage ourself into providing the most considerate and professional solution and service to customers. RION introduce advanced equipment, such as TEMP&HUMI chamber, salt spray corrosion test chamber, high precision automatic turntable, high precision marble checking platform, digital thermostat drying oven, electrostatic discharge tester and 360 degree mechanical turntable etc, and set up Environmental Testing Laboratory, Product Aging Chamber, 2D&3D Posture Calibration Room and Shake&Impact Test Room for R&D and factory test.
Beside owning excellent hardware, RION also developed 15 sets of software independently and keep developing, including multi-sensor monitor software, remote sensor monitor software, synchronous dynamic l tracking 3D presentation software, tilt switch early warning and debugging software and sensor serial port setting presentation software etc which could apply to XP, Win7, Win8, WinCE and Android system. RION, owning talent and diligent personnel, advanced technology and market-orientated strategy, engages itself in offerring you the most considerate and professional solution and service of position sensor.
You satisfaction is our mission.
Certificates & Honor
T/T/Paypal/West Union
- Packaging: carton with sponge
- Delivery time: within 7 business days for common order after we receive the full payment
- Shipping time: 3-5 work days by DHL/UPS/FEDEX/TNT; 5-7 work days by EMS.
Pre-sale service
- Evaluate your application, recommend the most suitable item;
- Make you fully understand the products, usage and maitenance;
- Answer all your questions, and let you have no doubt before make any decision;
- Adjust, revise or redesign our products to consist with the application(for customized service);
Sales service
- Recommend the best payment term and shipping term for you;
- Make official quotation and PI with company Stamp;
- Keep you posted about the products producing;
- Send exactly requried products on time;
- Provide tracking NO. and inform you when products leave factory and arrive destination;
Post-sale service
- Instruct products connection, installation and application;
- if anything happen to products(barely will), engineer will evaluate the problem, solve the problem or exchange malfunction item for free, make sure you get the best solution and service.
- Keep tracking the products usage and ask for suggestion and advice.
- How to choose suitable item: bowse our webiste and choose products by catalog, or contact us directly by email, skype, TM.
- How to buy: We accept the payment by Escrow/Alipay,including Paypal,Credit Card and T/T, WU.
- How to ship: by DHL, Fedex, UPS, EMS, TNT and ARAMEX Express mainly, we have long term and reliable logistic cooperator to ensure the safety and cost-saving
- How to apply: We provide instruction manual, software and online service to instuct you to connect, install, use and maintain our products.
- What if anything happen to products: contact us, we will evaluate the problem and instruct you, exchange the wrongly purchased item or fix the malfunction item for free...till you get the best solution.
- What if no suitable item to be found: customerized service is available.
- How to cooperate: we offer technical support, products info, samples, favorable terms&condition and sales support in concerned region.