Specifications
1.identify day and night automatically
2.celling mount
3.material:Glass cover and Iron base plate
Welcome to read ES-PL01C PIR motion sensor led light !
This product is an energy-saving lamp, which can turn on when one comes and turn off when leaves. It can identify day and night automatically. It adopts infrared energy discharging detector, IC and SMD technology its performance is stable and reliable. When one enters the detection field and trigger it, the infrared sensor will work and make the lamp on. When leaves, the lamp will die out automatically.
SPECIFICATION
|
| ||||||||||||||||||||||
DETECTION RANGE | Max 6M | ||||||||||||||||||||||
DETECTION ANGLE | 360° | ||||||||||||||||||||||
POWER SOURCE | 220-240V/AC | ||||||||||||||||||||||
POWER FREQUENCY | 50/60HZ | ||||||||||||||||||||||
RATED LOAD | E27/2*40W | ||||||||||||||||||||||
TIME SETTING | 10sec-2min | ||||||||||||||||||||||
WORKING HUMIDITY | <93%RH | ||||||||||||||||||||||
WORK TEMPERATURE | -10°C~+40°C | ||||||||||||||||||||||
INSTALLING HEIGHT | 2m-4.5m |
FUNCTION
1.It can identify day and nigh, and could choose the intensity of illumination what is in the working atmosphere by free. When turn the LUX knob to SUN symbol, it could be worked in any light, when turn to MOON symbol, it only could be worked in the night when the light is less than 3 LUX
2.Time Delay continues adding: after first inducting, when it receives the second induction signal again, the time delay will be re-clocking base on the first remainder time-delay (Set Time).
3.Adjustable Time Delay: the length of time delay could be set according to the customers’ requirement, the minimum time of this item is 10sec ± 3sec, the maximum is 2 min ± 30sec.
INSTALLATION
- Ø Switch off the power.
- Ø Unscrew the plastic screw nut and remove the glass lampshade, then cross the wire through wires hole according to the following connect-wire figure.
- Ø Enclose the incandescent bulbs or energy-saving lamps. Install the sensor lamp in the position where you need with inflated screws.
- Ø Fasten the lampshade, then electrifying and testing.
- CONNECTION-WIER SKETCH DIAGRAM
Connecting the power source into the ”N” , ”L” according to connection wire diagram when you install it.
Factory is located in Ninghai County Ningbo City Zhejiang Province China.
Ofiice
Sample Room