Welcome to use ES-M07 RADAR MOTION DETECTOR !
1.Detection Range: 360 degree
2.Detection Distance: 2-10m
3.HF System: 5.8GHz CW radar, ISM band
4.Transmission Power: <10mW
The product is a new saving-energy switch; it adopts microwave sensor mould withhigh-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible through doors, panes of glass or thin walls.
SPECIFICATION:
| MODEL | ES-M07 |
|
| DETECTION RANGE | 2-12M | |
| DETECTION ANGLE | 360° | |
| POWER SOURCE | 110V-130V/AC 220-240V/AC | |
| POWER FREQUENCY | 50/60HZ | |
| HF SYSTEM | 5.8GHz CW radar, ISM band | |
| RATED LOAD | 800W(110-130V/AC) 1200W(220-240V/AC) Incandescent lamp | |
200W(110-130V/AC) 300W(220-240V/AC) Energy-saving lamp | ||
| TIME SETTING | 5sec-10±2min | |
| WORKING HUMIDITY | <93%RH | |
| TRANSMISSION POWER | <10M/W | |
| INSTALLING HEIGHT | 1.8m-2.5m | |
| AMBIENT LIGHT | <10lux~2000lux(adjustable) |
FUNCTION:
- Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
- SENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for detection distance; High sensitivity with 16m, it fits for large room.
- Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest
- Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 12min±1min.
- Switch off the power.
- Fix the bottom on the selected position with the inflated screw through the screw holes in the side of the sensor.
- Connecting the power and the load to sensor as per the connection-wire sketch diagram.
- Switch on the power and test it
Connect N, L with power; Connect N, L’ with load.
Factory is located in Ninghai County Ningbo City Zhejiang Province China.
Ofiice
Sample Room